DOWNLOAD Panasonic DP-C354 / DP-C264 / DP-C323 / DP-C263 / DP-C213 / DP-C322 / DP-C262 Service Manual ↓ Size: 55.13 MB | Pages: 127 in PDF or view online for FREE

Order Number: MGCS060801C0

H21

This service information is designed for experienced repair technicians only and is not intended for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service 
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.

2

3

4

This service information is designed for experienced repair technicians only and is not intended for use 
by the general public. It does not contain warnings or cautions to advise non-technical individuals of 
potential dangers in attempting to service a product. Products powered by electricity should be serviced 
or repaired only by experienced professional technicians. Any attempt to service or repair the product or 
products dealt within this service information by anyone else could result in serious injury or death.

Please read these Instructions completely BEFORE repairing, or installing any 
optional accessories. Installing the additional board, or connector with the power 
ON (only the power switch OFF) could damage the SPC, and/or SC board.

If your machine has the Hard Disk Drive Unit installed, to prevent a Disk Scan 
Function from being performed (similar to when the power is abruptly interrupted
to the PC), it is important to follow the step sequence below when turning OFF 
the Power Switches on the machine.

1. Turn the Power Switch on the Left 
    Side of the machine to the OFF 
    position first.
2. Wait approximately 10 seconds 
    while the machine writes the 
    closing status onto the Hard Disk
    Drive Unit.
3. Turn the Main Power Switch on 
    the Back of the machine to the 
    OFF position. (This interrupts all 
    the power to the machine)
4. Disconnect the Telephone Line Cable, 
    if the Fax option is installed.
5. Unplug the AC Power Cord.

   

  

(When the Fax option is installed, there is a remote possibility of electrocution when 

      servicing the unit during a Lightning Storm. As a precaution, disconnect the Telephone 
      Line Cable first, before unplugging the AC Power Cord.

* The specifications are subject to change without notice. Panasonic Communications Co., Ltd. reserves 
  the right to make improvements in the product design without reservation, and without notice.