DOWNLOAD Panasonic TX-PR65VT20 Service Manual ↓ Size: 24.85 MB | Pages: 127 in PDF or view online for FREE

29

1. Remove the SU-Board and SD-Board. (See section 9.10.

and 9.11.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×10 

) and remove the SC-Board.

1. Disconnect the bridge connector (SS02-SS24) and dis-

connect the flexible cable (SS52).

2. Remove the screws (

×2 

) and remove the SS2-Board. 

1. Remove the Tuner unit. (See section 9.5.)
2. Disconnect the bridge connector (SS03-SS22) and dis-

connect the flexible cables (SS57 and SS59).

3. Remove the screws (

×4 

) and remove the SS3-Board.

1. Remove the Tuner unit. (See section 9.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SS11).
4. Disconnect the flexible cables (SS33, SS53, SS55 and

SS56).

5. Disconnect the bridge connectors (SS02-SS24 and

SS03-SS22).

6. Remove the screws (

×7 

) and remove the SS-Board.

30

1. Remove the screws (

×2 , 

×2 ).

2. Remove the Support metal.

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Support metal. (See section 9.16.)
3. Remove the Hanger metals (L, R) fastening screws (

×6

, 

×2 

 each) and remove the Hanger metals (L, R).

4. Remove the V-bar connecting metal-bottoms (L, R) fas-

tening screws (

×2 

 each) and remove the V-bar con-

necting metal-bottoms (L, R) and the Bracket covers (L,
R).

1. Remove the AC inlet. (See section 9.1.)
2. Disconnect the flexible cables (D5, D20, D31, D32, D33

and D34).

3. Disconnect the connectors (D3 and D25).
4. Remove the screws (

×4 

) and remove the D-Board.

1. Remove the Hanger metal R (See section 9.17.).
2. Remove the flexible cable holder fastening screws (

×10

).

3. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and

CB5).

4. Disconnect the flexible cable (C10).
5. Remove the screws (

×5 

) and remove the C1-Board.

31

1. Remove the Support metal. (See section 9.16.)
2. Remove the flexible cable holder fastening screws (

×10

).

3. Disconnect the flexible cables (CB6, CB7, CB8, CB9 and

CB10).

4. Disconnect the flexible cables (C20, C21 and C26).
5. Remove the screws (

×5 

) and remove the C2-Board.

1. Remove the Hanger metal L. (See section 9.17.)
2. Remove the flexible cable holder fastening screws (

×10

).

3. Disconnect the flexible cables (CB11, CB12, CB13, CB14

and CB15).

4. Disconnect the flexible cables (C31, C33 and C36).
5. Disconnect the connector (C35).
6. Remove the screws (

×6 

) and remove the C3-Board.

1. Remove the Hanger metal R. (See section 9.17.)
2. Remove the flexible cable holder fastening screws (

×10

).

3. Disconnect the flexible cables (CA1, CA2, CA3, CA4 and

CA5).

4. Disconnect the flexible cable (C40).
5. Remove the screws (

×5 

) and remove the C4-Board.

1. Disconnect the flexible cable holder fastening screws

(

×10 ).

2. Disconnect the flexible cables (CA6, CA7, CA8, CA9 and

CA10).

3. Disconnect the flexible cables (C50, C51 and C56).
4. Remove the screws (

×5 

) and remove the C5-Board.

1. Remove the Hanger metal L. (See section 9.17.)
2. Disconnect the flexible cable holder fastening screws

(

×10 ).

3. Disconnect the flexible cables (CA11, CA12, CA13, CA14

and CA15).

4. Disconnect the flexible cables (C61 and C66).
5. Remove the connector (C65).
6. Remove the screws (

×5 

) and remove the C6-Board.

32

1. Remove the plasma panel fastening screws (

×12 , 

×2

, 

×4 

) and remove the cabinet assy.

2. For leaving the cabinet assy from the plasma panel, pull

the bottom of the cabinet assy forward, lift, and remove.

1. Remove the Cabinet assy. (See section 9.25.)
2. Remove the screws (

×2 ).

3. Remove the Rear cover hooks (L, R).

4. Remove the screws (

×6 ).

5. Remove the Contact metal top.
6. Remove the screws (

×10 ).

7. Remove the Contact metal bottom.
8. Remove the screws (

×8 ).

9. Remove the Contact metals (L, R).