Panasonic TX-P50X60E / TX-PR50X60 Service Manual ▷ View online
8
4 Specifications
Q
Product fiche
Q
Other information
Energy efficiency class (E)
B
Visible screen size (diagonal)
127 cm / 50 inches
On mode average power consumption
(E)
(E)
132 W
Annual energy consumption*
1
(E)
183 kWh
Rated power consumption
240 W
Standby power consumption*
2
0.40 W
Off mode power consumption (E)
0.30 W
Display resolution
1,024 (W)
× 768 (H)
*
1
: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days.
The actual energy consumption will depend on how the television is used.
*
2
: When the TV is turned off with the remote control and no function is active.
Dimensions (W
× H × D)
1,184 mm
× 757 mm × 266 mm (With Pedestal)
1,184 mm
× 716 mm × 81 mm (TV only)
Mass
21.5 Net (With Pedestal)
20.5 Net (TV only)
20.5 Net (TV only)
Power source
AC 220-240 V, 50 / 60 Hz
Panel
Plasma panel
Sound
Speaker
(160 mm
× 40 mm) × 2, 8 Ω
Audio output
20 W (10 W + 10 W)
Headphones
M3 (3.5 mm) stereo mini Jack
× 1
Operating conditions
Temperature:
0
°C- 35 °C
Humidity:
20 % - 80 % RH (non-condensing)
Connection terminals
AV1 input / output
SCART (Audio/Video in, Audio/Video out, RGB in)
AV2 input (COMPONENT /
VIDEO)
VIDEO)
VIDEO:
RCA PIN Type
× 1 1.0 V [p-p] (75 Ω)
AUDIO L-R:
RCA PIN Type
× 2 0.5 V [rms]
Y:
1.0 V [p-p] (including synchronization)
P
B
, P
R
:
±0.35 V [p-p]
HDMI1 / 2 input
TYPE A Connectors
HDMI1 :
HDMI1 :
Content Type, Deep Colour, x.v.Colour™
HDMI2 :
Content Type, Audio Return Channel, Deep Colour,
x.v.Colour™
x.v.Colour™
• This TV supports [ HDAVI Control 5 ] function.
Card slot
Common Interface slot (complies with CI Plus)
× 1
USB
USB2.0 DC 5 V, Max. 500 mA
DIGITAL AUDIO output
PCM / Dolby Digital / DTS, Fiber optic
Receiving systems / Band name (E)
DVB-C
Digital cable services (MPEG2 and MPEG4-AVC(H.264))
DVB-T
Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))
PAL B, G, H, I, SECAM B, G, SECAM L, L
'
VHF E2 - E12
VHF H1 - H2 (ITALY)
VHF A - H (ITALY)
UHF E21 - E69
CATV (S01 - S05)
CATV S1 - S10 (M1 - M10)
CATV S11 - S20 (U1 - U10)
CATV S21 - S41 (Hyperband)
PAL D, K, SECAM D, K
VHF R1 - R2
VHF R1 - R2
VHF R3 - R5
VHF R6 - R12
UHF E21 - E69
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR)
M.NTSC
Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only)
Playback from NTSC Video recorders (VCR)
• Check the latest information on the available services at the following website. (English only)
http://panasonic.net/viera/support
Receiving systems / Band name (R)
DVB-C
Digital cable services (MPEG2 and MPEG4-AVC(H.264))
DVB-T
Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))
PAL D, K, SECAM D, K
VHF R1 - R2
VHF R1 - R2
VHF R3 - R5
VHF R6 - R12
UHF E21 - E69
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR)
9
M.NTSC
Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only)
Playback from NTSC Video recorders (VCR)
• Check the latest information on the available services at the following website. (English only)
http://panasonic.net/viera/support
Aerial input
VHF / UHF
Note
• Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
• This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020
10
5 Technical Descriptions
5.1.
Specification of KEY for CI Plus, DTCP-IP, WIDEVINE, Netflix and One-
to-One
to-One
5.1.1.
General information:
1. NAND Flash (IC8900) for spare parts has the seed of KEY for each.
2. The final KEY data will be generated by Main IC (IC8000) when SELF CHECK was done and are stored in both Main IC
2. The final KEY data will be generated by Main IC (IC8000) when SELF CHECK was done and are stored in both Main IC
(IC8000) and NAND Flash (IC8900).
Five KEY are not generated for all models.
The necessary KEY are only generated and stored depend on the feature of models.
Five KEY are not generated for all models.
The necessary KEY are only generated and stored depend on the feature of models.
5.1.2.
Replacement of ICs:
When Main IC (IC8000) is replaced, NAND Flash (IC8900) should be also replaced with new one the same time.
When NAND Flash (IC8900) is replaced, Main IC (IC8000) is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more
than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
When NAND Flash (IC8900) is replaced, Main IC (IC8000) is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more
than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
5.1.3.
Model and Keys:
Model No.
Keys
One-to-One
(For USB Rec.)
CI Plus
DTCP-IP
WIDEVINE
Netflix
TX-P50X60E
None
Yes
None
None
None
TX-PR50X60
None
Yes
None
None
None
11
6 Service Mode
6.1.
How to enter into Service Mode
6.1.1.
Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [
RED] button of the remote control three times within 2 seconds.
6.1.2.
Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
6.1.3.
How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
Click on the first or last page to see other TX-P50X60E / TX-PR50X60 service manuals if exist.