Panasonic TH-R42PV8KS Service Manual / Other ▷ View online
20
3. Remove the screw (
) and remove the GS-Board.
7.6.
Remove the A-Board
1. Remove the tuner unit. (See section 7.4.)
2. Remove the tab and remove the CI cover.
2. Remove the tab and remove the CI cover.
3. Remove the screws (
×7
) and remove the A-Board.
7.7.
Remove the SU-Board (42 inch)
1. Remove the flexible cables (SU1, SU2, SU3 and SU4)
connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (
×2 ,
×2
) and remove the SU-
Board.
7.8.
Remove the SM-Board
(37 inch)
(37 inch)
1. Remove the flexible cables (SM1, SM2, SM3, SM4, SM5
and SM6).
2. Remove the bridge connector (SM41, SM42 and SM46).
3. Remove the screws (
3. Remove the screws (
×3 ,
×4
) and remove the SM-
Board.
21
7.9.
Remove the SD-Board (42 inch)
1. Remove the flexible cables (SD1, SD2, SD3 and SD4)
connected to the SD-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (
×2 ,
×2
) and remove the SD-
Board.
7.10. Remove the SC-Board
1. Remove the SU-Board, SM-Board and SD-Board. (See
section 7.7., 7.8. and 7.9.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (
×6
) and remove the SC-Board.
7.11. Remove the SS-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS23 and
2. Disconnect the connectors (SS11, SS12, SS23 and
SS34).
3. Disconnect the flexible cables (SS53A and SS56A) (42
inch)/(SS53 and SS56) (37 inch).
4. Remove the molding prop (
×1 ).
5. Remove the srews (
×5
) and remove the SS-Board.
7.12. Remove the stand brackets
1. Remove the plasma panel section from the servicing
stand and lay on a fiat surface such as a table (covered)
with the plasma panel surface facing downward.
with the plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws
(
×4
each) and remove the stand brackets (left, right).
22
7.13. Remove the C1-Board
1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws (
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws (
×8
).
4. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (
×4
) and remove the C1-Board.
42 inch
37 inch
7.14. Remove the C2-Board
1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws
(
×8 ).
4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connector (C23).
7. Remove the screws (
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connector (C23).
7. Remove the screws (
×4
) and remove the C2-Board.
42 inch
37 inch
7.15. Remove the front shield unit
assy
1. Disconnect the connector (A51 and A52). (See section
7.4.)
2. Remove the screws (
×4
) and remove the front shield
unit assy.
7.16. Remove the G-Board
1. Remove the front bracket and the front shield unit assy.
(See section 7.15.)
2. Remove the screws (
×2
) and remove the front shield
front.
3. Remove the screws (
×5
) and disconnect the connec-
tor (G51).
4. Remove the G-Board.
23
7.17. Remove the speaker L, R
1. Disconnect the connector (A12). (See section 7.4.)
2. Remove the screws (
2. Remove the screws (
×4
each) and remove the
speaker L, R.
7.18. Remove the S-Board
1. Remove the stand brackets. (See section 7.12.)
2. Remove the screws (
2. Remove the screws (
×2 ).
3. Disconnect the connector (S1).
4. Remove the screws (
×2
) and remove the S-Board.
7.19. Remove the K-Board
1. Remove the S-Board. (See section 7.18.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (
2. Unlock the cable clampers to free the cable.
3. Remove the screws (
×2 ).
4. Disconnect the connectors (K1) and remove the K-Board.
7.20. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
(glass)
1. Remove the stand brackets (left, right) fastening screw
(
×1
each).
2. Remove the cabinet assy and the plasma panel fastening
Click on the first or last page to see other TH-R42PV8KS service manuals if exist.