Panasonic TH-85PF12E Service Manual ▷ View online
37
TH-85PF12E
2. Disconnect the connector (C25).
3. Remove the flexible cables from the connectors (C20,
3. Remove the flexible cables from the connectors (C20,
C21, C22).
4. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA5, CA6, CA7, CA8).
5. Remove 6 screws ( ) and then remove C2-Board (lower).
9.28. Removal of C3-Board (lower)
1. Remove the Rear Cover Fixing Metal (lower_center).
(Refer to Removal of C2-Board (lower))
2. Remove the flexible cables from the connectors (C30,
C31, C32).
3. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA9, CA10, CA11, CA12).
4. Remove 6 screws ( ) and then remove C3-Board (lower).
9.29. Removal of C4-Board (lower)
1. Remove 2 screws and then remove the Rear Cover Fix-
ing Metal (lower_right).
2. Remove the flexible cable from the connector (C40).
3. Remove 8 screws ( ) and then remove the flexible
3. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA13, CA14, CA15, CA16).
4. Remove 6 screws ( ) and then remove C4-Board (lower).
9.30. Removal of AC Inlet Block
38
TH-85PF12E
1. Disconnect the connector (P9).
2. Remove 2 screws and then remove the AC Inlet Block.
2. Remove 2 screws and then remove the AC Inlet Block.
9.31. Removal of Front Glass, V1,
V3-Board and Cabinet Assy
1. Disconnect the connectors (DS15, S34).
2. Disconnect 2 Relay Connectors.
2. Disconnect 2 Relay Connectors.
3. Remove the Side Power Unit.
(Refer to Removal of S1-Board and V2-Board )
4. Remove 16 screws and then remove Cabinet Block.
5. Pull the bottom of the Cabinet Block forward and lift.
6. Remove the Cabinet Block.
9.31.1. Removal of Front Glass
1. Remove 40 screws and then remove the Fixed Angles
(left, right, top, bottom).
2. Remove the Front Glass.
(Note)
• When removing the Front Glass from Cabinet, there
is a risk of the glass center bending damage.
• Be sure to lift the instruction six positions of the fig-
ure, when remove the Front Glass.
39
TH-85PF12E
Note: when Front Glass is exchanged
• Paste the Sponges in order along each Fixed Angles
(top, bottom, left, right).
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
9.31.2. Removal of V1-Board and V3-Board
1. Remove 1 screw (N).
2. Disconnect the connector (V1) and then remove V1-
2. Disconnect the connector (V1) and then remove V1-
Board.
3. Remove 1 screw (P).
4. Disconnect the connector (V3) and then remove V3-
Board.
9.31.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V3-Board.
(Refer to Removal of V1-Board and V3-Board)
3. Remove the LED Panel and Remote Sensor Panel.
40
TH-85PF12E
4. Remove 16 screws and then remove the Cabinet Corner
stopper Metals.
5. Remove the Cabinet Corner Joint Metals and Cabinet
(left, right, upper, lower)
Note: when Cabinet is exchanged
• Paste the felts in order along each Fixed Angles (left,
right, upper, lower).
• Make sure the felts do not protrude from the edge of the
cabinet.
Note
• The felts are parts which cannot be recycled. Please use
the new article when you exchange the Cabinet.
9.32. Removal of Plasma Display
Panel
The C1 (upper, lower), C2 (upper, lower), C3 (upper,
lower),C4 (upper, lower), SS, SS2, SS3, SC, SU, SD Boards
and, flexible cables between D-C Boards and D-SC Boards,
are connected with the Plasma Display Panel for the repair.
lower),C4 (upper, lower), SS, SS2, SS3, SC, SU, SD Boards
and, flexible cables between D-C Boards and D-SC Boards,
are connected with the Plasma Display Panel for the repair.
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover)
2. Disconnect the connectors (DS15, S34).
3. Disconnect 2 Relay Connectors.
3. Disconnect 2 Relay Connectors.
Click on the first or last page to see other TH-85PF12E service manuals if exist.