Panasonic TH-85PF12E Service Manual ▷ View online
25
TH-85PF12E
2. Remove screws (
×24 ) and then remove the Rear
Cover ( A ).
9.2.2.
Removal of Rear Cover ( B )
1. Remove screws (
×26 ,
×12 ) and then remove the
Rear Cover ( B ).
9.2.3.
Removal of Rear Cover ( C )
1. Remove screws (
×26 ,
×6 ) and then remove the
Rear Cover ( C ).
9.2.4.
Removal of Rear Cover ( D )
1. Remove Eye Bolt Covers M12.
26
TH-85PF12E
2. Remove screws (
×21 ) and then remove the Rear
Cover ( D ).
9.3.
Removal of HDE-Board
1. Remove 4 screws (A) and then remove the HDE Terminal
Block.
2. Remove 4 screws (B).
3. Remove 2 screws (C) and then remove HDE-Board.
3. Remove 2 screws (C) and then remove HDE-Board.
9.4.
Removal of HL-Board
1. Remove 4 screws (D) and then remove the HL Terminal
Block.
2. Remove 4 screws (E).
3. Remove 2 screws (F) and then remove HL-Board.
9.5.
Removal of H5-Board
1. Remove 2 screws and then remove H5-Board Block.
2. Disconnect the connector (H51).
2. Disconnect the connector (H51).
3. Remove 1 screw (G).
4. Remove 2 screws (H) and then remove H5-Board.
4. Remove 2 screws (H) and then remove H5-Board.
27
TH-85PF12E
9.6.
Removal of DS-Board
1. Remove the HL Terminal Block and the HDE Terminal
Block.
(Refer to Removal of HL-Board and HDE-Board)
(Refer to Removal of HL-Board and HDE-Board)
2. Remove H5-Board Block.
(Refer to Removal of H5-Board)
3. Remove 6 screws and then remove the Slot Case.
4. Disconnect the connector (DS14).
5. Remove 10 screws and then remove the Fixed Plate
5. Remove 10 screws and then remove the Fixed Plate
6. Disconnect the connectors (DS2, DS4, DS6, DS9, DS15).
7. Remove the flexible cables from the connectors(DS1,
7. Remove the flexible cables from the connectors(DS1,
DS3).
8. Remove 3 screws and then remove DS-Board.
9.7.
Removal of HX-Board
1. Remove the Slot Case.
(Refer to Removal of DS-Board)
2. Disconnect the connector (HX1).
3. Remove 4 Hexagonal-Head screws and 2 screws and
3. Remove 4 Hexagonal-Head screws and 2 screws and
then remove HX-Board.
28
TH-85PF12E
9.8.
Removal of DN-Board
Check that no bright points appears by Ve Life adjustment
after both D and DN board exchange.
after both D and DN board exchange.
1. Disconnect the connectors (DN3, DN5, DN9).
2. Remove the flexible cables from the connectors (DN1,
2. Remove the flexible cables from the connectors (DN1,
DN2)
3. Remove 4 screws and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.
mode after DN-Board exchange.
9.9.
Removal of PB-Board
1. Disconnect the connectors (PB30, PB31, PB56, PB59,
PB61, PB62, PB64, PB66, PB69, PB71).
2. Remove 4 screws and then remove PB-Board.
9.10. Removal of D-Board
Check that no bright points appears by Ve Life adjustment
after both D and DN board exchange.
after both D and DN board exchange.
1. Remove the Eye Bolt (M12).
2. Remove 4 screws and then remove the Rear Cover Angle
2. Remove 4 screws and then remove the Rear Cover Angle
block (center).
3. Disconnect the connectors (D3, D5, D21, D25).
4. Remove the flexible cables from the connectors (D20,
4. Remove the flexible cables from the connectors (D20,
D31, D32, D33, D34).
Click on the first or last page to see other TH-85PF12E service manuals if exist.