Panasonic TH-65PF30ER Service Manual ▷ View online
25
TH-65PF30ER
3. Remove 2 screws (A) and then remove H3-Board.
9.12. Removal of SU-Board and SD-
Board
1. Remove the Duct Barrier (B).
2. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
SD11).
3. Disconnect the connectors (SU41, SD42, SD46).
4. Remove 5 screws ( ).
5. Remove 4 screws ( ) and then remove SU-Board and
4. Remove 5 screws ( ).
5. Remove 4 screws ( ) and then remove SU-Board and
SD-Board.
9.13. Removal of SC-Board
1. Remove the Fan-Duct Barrier (B).
(Refer to Removal of SU-Board and SD-Board)
2. Disconnect the connectors (SC2, SD42, SD46, SU41).
3. Remove the flexible cable from the connector (SC20).
4. Remove 9 screws ( ).
3. Remove the flexible cable from the connector (SC20).
4. Remove 9 screws ( ).
26
TH-65PF30ER
5. Remove 4 screws ( ) and then remove SC-Board.
9.14. Removal of SS-Board
1. Remove 3 screws and then remove the HX Sub Metal.
2. Disconnect the connectors (A5, A11, A13, A16, A22,
A37).
3. Remove the flexible cables from the connectors (A1,
A15).
4. Remove 4 screws ( ) and then remove the A-Board
Block.
Note: when fixing A-Board Block
• Put the flexible Cable between the Fixed Metal and A-
Board when Connect the flexible Cable to the connector
(A1).
(A1).
5. Remove the Fan Block (C).
(Refer to remove of Fan Block).
6. Disconnect the connector (SS11).
7. Remove the flexible cables from the connectors (SS33,
7. Remove the flexible cables from the connectors (SS33,
SS64, SS65, SS66).
8. Remove 7 screws ( ).
9. Remove 3 screws ( ) and then remove SS-Board.
9. Remove 3 screws ( ) and then remove SS-Board.
9.15. Removal of SS2-Board
1. Remove the SS-Board.
(Refer to remove of SS-Board).
2. Remove the flexible cable from the connector (SS69).
3. Remove 2 screws ( ) and then remove SS2-Board.
3. Remove 2 screws ( ) and then remove SS2-Board.
9.16. Removal of C1-Board
1. Remove 15 screws ( ).
27
TH-65PF30ER
2. Remove 6 screws ( ) and then remove Contact Metal
(bottom).
3. Remove the flexible cable from the connector (C10).
4. Remove 3 screws ( ).
5. Remove the flexible cables from the connectors (CB1,
4. Remove 3 screws ( ).
5. Remove the flexible cables from the connectors (CB1,
CB2, CB3) and then remove C1-Board.
9.17. Removal of C2-Board
1. Remove the Contact Metal (Lower).
(Refer to remove of C1-Board).
2. Remove the flexible cables from the connectors (C20,
C21, C26).
3. Remove 4 screws ( ).
4. Remove remove the flexible cables from the connectors
4. Remove remove the flexible cables from the connectors
(CB4, CB5, CB6, CB7, CB8, CB9) and then remove C2-
Board.
Board.
9.18. Removal of C3-Board
1. Remove the Fan Block (C).
(Refer to remove of Fan).
2. Remove 6 screws and then remove the Hanger Assy L
and the Stand Pole Bracket Assy (L).
1. Remove the Contact Metal (Lower).
(Refer to remove of C1-Board).
2. Disconnect the connector (C35).
3. Remove the flexible cables from the connectors (C31,
3. Remove the flexible cables from the connectors (C31,
C33, C36).
4. Remove the flexible cables from the connectors (CB10,
CB11, CB12, CB13, CB14, CB15).
5. Remove 4 screws ( ) and then remove C3-Board.
9.19. Removal of S1-Board
1. Remove 2 screws (B) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (C) and then remove S1-Board.
4. Remove the Switch Attachment from S1-Board.
3. Remove 1 screw (C) and then remove S1-Board.
4. Remove the Switch Attachment from S1-Board.
28
TH-65PF30ER
9.20. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (A11, A22).
3. Remove 20 screws ( ).
3. Remove 20 screws ( ).
4. Pull the bottom of the Cabinet Block forward and lift.
9.20.1. Removal of Front Glass
1. Remove 28 screws and then remove the Fixed Angle
(left, right, top-rear, bottom-rear).
2. Remove the Front Glass.
Note: when fixing Fixed Angle (top-rear, bottom-rear)
• Firstly (1-2-3) in order.
• When attaching the Fixed Angle (top),attach it in down-
• When attaching the Fixed Angle (top),attach it in down-
ward direction.
• When attaching the Fixed Angle (left, right),attach it in
upward direction.
Note: when Front Glass is exchanged
• Paste the Front Glass Sponges in order along each
Fixed Angles left and right, top and bottom.
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
9.20.2. Removal of V1-Board and V2-Board
1. Remove 20 screws and then remove Fixed Angle (left,
right, bottom-rear).
2. Remove 1 screw (D).
Click on the first or last page to see other TH-65PF30ER service manuals if exist.