DOWNLOAD Panasonic TH-65PF12WK / TH-65PF12TK Service Manual ↓ Size: 19.81 MB | Pages: 127 in PDF or view online for FREE

9

TH-65PF12WK / TH-65PF12TK

220 - 240 V AC, 50/60Hz (WK)

110 V AC, 50/60Hz (TK)

Power on

695 W (WK)

720 W (TK)

Stand-by condition

Save OFF 1.2 W, Save ON 0.7 W (WK)

Save OFF 1.0 W, Save ON 0.5 W (TK)

Power off condition

0.4 W (WK)

0.2 W (TK)

Drive method: AC type 65-inch,
16:9 aspect ratio

1,434 mm (W) 

× 806 mm (H) × 1,645 mm (diagonal)

(No. of pixels)

2,073,600 (1,920 (W) 

× 1,080 (H))   [5,760 × 1,080 dots]

Temperature

0 

°C - 40 °C

Humidity

20 % - 80 %

Scanning format

525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) / 

60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i

PC signals

VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz

HDMI A-B

TYPE A Connector 

× 2

LAN

RJ45 10BASE-T / 100BASE-TX, compatible with PJLink

TM

COMPONENT / RGB IN

Y / G (BNC)

with sync 1.0 Vp-p (75-ohm)

P

B

/B (BNC), P

R

/R (BNC)

0.7 Vp-p (75-ohm)

Audio Input

Stereo mini jack (M3) 

× 1

0.5 Vrms

PC IN

(HIGH-DENSITY Mini-D-SUB 15PIN)

Y or G with sync 1.0 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)

B / P

B

 / C

B

: 0.7 Vp-p (75-ohm)

R / P

R

 / C

R

: 0.7 Vp-p (75-ohm)

HD / VD:  1.0 - 5.0 Vp-p (high impedance)

Audio Input

Stereo mini jack (M3) 

× 1

0.5 Vrms

SERIAL

EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) 

RS-232C COMPATIBLE

SPEAKERS

8-ohm, 20 W [10 W + 10 W] (10 % THD)

Remote Control Transmitter

N2QAYB000432

Batteries

R6 Size  

× 2 

Fixing band

TMME203 

× 1

Ferrite core

J0KG00000014 

× 2

× H × D)

1,554 mm 

× 925 mm × 99 mm 

main unit only

approx. 59.0 kg net

with speakers

approx. 65.0 kg

• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.

10

TH-65PF12WK / TH-65PF12TK

11

TH-65PF12WK / TH-65PF12TK

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID”
adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the “Volume down” button on main unit together with “R” button on the remote control and hold for more than 5 seconds.
The “SHIPPING“ menu is displayed and the lock is released when it disappears.

Option Menu for GPF12D series

Option menus

default setting

Contents

Weekly Command Timer

---

Sets Weekly Command Timer.

Onscreen display

On

Enable/Disable to display input mode indication after power on and no signal 
indication.

Initial INPUT

Off

Sets the initial input mode when the power is turned on. Allow input mode selec-
tion while power is on.

Initial VOL level

Off

Sets the initial volume level when the power is turned on. Allow Volume control 
while power is on.

Maximum VOL Level

Off

Sets the maximum volume to desired level. Volume cannot exceed this level.

INPUT lock

Off

Fixes the input mode to AV, Component/RGB or PC. Can not change input 
mode by input selection key.

Button lock

Off

Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volume up/
down)

Remocon User Level

Off

Remote key invalidation.
Off: Valid key is all key of remote.
User1: Valid key are only Stand-by (ON/OFF), Input, Direct input, Picture, Sur-
round, Sound mute On/Off, and volume adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void

Off-timer function

Enable

Off-timer operation Enable/Disable.

Initial Power Mode

Normal

Sets the power mode of the unit for when the power recovers from failure or 
after plugging off and in again.

ID select

0

Set ID number from 0 to 100.

Remote ID

Off

Remote ID function On/Off.
(While the Remote ID on, standard remote function can not control the unit.)

Serial ID

Off

Serial ID function On/Off

Display size

Off

Display size function On/Off

Studio W/B

Off

Studio W/B function On/Off

Studio Gain

Off

Studio Gain function On/Off

Slot power

Off

Sets the slot power mode while the power is turned on.
Allow Optional Terminal Board insert Slots while power is on.

Power On Screen Delay

Off

You can set the power-on delay time of the displays to reduce the power load, 

when you press 

 to turn on the multiple displays that are set together, for 

example, on MULTI DISPLAY system.
Set each display’s setting individually.

Clock Display

Off

Clock Display function On/Off.

All Aspect

Default

Aspect mode: default/All aspect mode.

Auto Setup

Manual

Sets the operational mode of the automatic position adjustment in the POS./
SIZE memu. 

Rotate

Off

Rotate function On/Off

Serial Slot Select

Slot2

Selects the slot which communicates serial.
Note: The setting of an external command can be set only from the fixed serial 
terminal.

12

TH-65PF12WK / TH-65PF12TK

To exit the CAT mode, access the ID mode and switch off the main power.

Select the IIC mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button on
the remote control.

Subject and item are mentioned on “IIC mode structure”.
To exit the IIC mode, press the R button on the remote control.