DOWNLOAD Panasonic TH-65PF12EK Service Manual ↓ Size: 19.28 MB | Pages: 127 in PDF or view online for FREE

Model
TH-65PF12EK
Pages
127
Size
19.28 MB
Type
PDF
Document
Service Manual
Brand
Device
Plasma / GPH12D CHASSIS
File
th-65pf12ek.pdf
Date
PREV: Panasonic TH-65PF11RK Service Manual / Other

Panasonic TH-65PF12EK Service Manual ▷ View online

21
TH-65PF12EK
9 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
•
, 
, 
, 
 , 
 and 
 marks indicate screw positions.
9.1.
Removal of Rear Cover
1. Remove screws (
×22 , 
×4 , 
×15  ) and then remove
the Rear Cover.
Note: when fixing the Rear Cover
• Screw on screws (*1, *2) firstly.
9.2.
Removal of HDE-Board
1. Remove 4 screws (A) and then remove the HDE Terminal
Block.
2. Remove 4 screws (B).
3. Remove 2 screws (C) and then remove HDE-Board.
9.3.
Removal of HL-Board
1. Remove 4 screws (D) and then remove the HL Terminal
Block.
2. Remove 4 screws (E).
3. Remove 2 screws (F) and then remove HL-Board.
9.4.
Removal of Slot Block
1. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
2. Remove the flexible cables from the connectors (DS1,
DS3).
3. Remove 6 screws and then remove the Slot Block.
22
TH-65PF12EK
9.5.
Removal of HX-Board
1. Remove the HA Terminal Block and the HHH Terminal
Block.
(Refer to Removal of HA-Board and HHH-Board)
2. Remove 1 screw ( ).
3. Remove 6 screws ( ) and then remove the Slot Case.
4. Disconnect the connector (HX1).
5. Remove 4 Hexagonal-Head screws and 2 screws and
then remove HX-Board.
9.6.
Removal of DS-Board
1. Remove the Slot Case.
(Refer to Removal of HX-Board)
2. Disconnect the connector (DS14).
3. Remove 10 screws and then remove the Fixed Plate.
4. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
5. Remove the flexible cables from the connectors (DS1,
DS3).
6. Remove 3 screws and then remove DS-Board.
9.7.
Removal of PB-Board
1. Disconnect the connectors (PB30, PB32, PB33, PB34,
PB36, PB37, PB38).
2. Remove 3 screws and then remove PB-Board.
23
TH-65PF12EK
9.8.
Removal of DN-Board
1. Disconnect the connectors (DN3, DN5, DN9).
2. Remove the flexible cables from the connectors (DN1,
DN2).
3. Remove 4 screws and then remove DN-Board and Fixed
Plate.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.
9.9.
Removal of D-Board
4. Disconnect the connectors (D3, D5, D25).
5. Remove the flexible cables from the connectors (D20,
D31, D32).
6. Remove 3 screws and then remove D-Board.
9.10. Removal of P-Board (MULTI)
1. Disconnect the connectors (P6, P7, P9, P25, P34, P35,
P52, P53, P55).
2. Remove 9 screws and then remove P-Board (MULTI).
9.11. Removal of P-Board (SUS)
1. Disconnect the connectors (P2, P11, P51, P54, P56).
2. Remove 6 screws and then remove P-Board (SUS).
9.12. Removal of H3-Board (L, R)
1. Remove 4 screws and then remove the Speaker Terminal
Blocks (L, R).
24
TH-65PF12EK
2. Disconnect the connector (H37).
3. Remove 3 screws (G) and then remove the H3-Board  (L,
R).
9.13. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 16 screws and then remove the Fan Blocks (1,
2, 3, 4).
3. Remove 4 screws and then remove the Fan (A).
4. Remove 4 screws and then remove the Fan (B).
5. Remove 12 screws and then remove the Fans (C, D, E).
6. Remove 4 screws and then remove the Fan (F).
7. Reassemble the Fans in reverse order.
Page of 127
Display

Click on the first or last page to see other TH-65PF12EK service manuals if exist.

RANDOM: