DOWNLOAD Panasonic TH-65PB2E Service Manual ↓ Size: 4.56 MB | Pages: 54 in PDF or view online for FREE

33

TH-65PB2E

6. Remove 4 screws ( ) and then remove SU-Board and

SD-Board.

1. Remove the Fan Block (A) and Duct Barrier (SC) Assy.

(Refer to Removal of SU-Board and SD-Board)

2. Disconnect the connectors (SC2, SU41, SD42, SD46),

and remove the flexible cable from the connector (SC20). 

3. Remove 9 screws ( ).
4. Remove 4 screws ( ) and then remove SC-Board.

1. Remove the Clampers and then remove the Duct Barrier

(SS) Assy.

2. Disconnect the connector (SS11), and remove the flexible

cables from the connectors (SS33, SS62, SS64).

3. Remove 5 screws  ( ).
4. Remove 3 screws ( ) and then remove SS-Board.

34

TH-65PB2E

1. Remove SS-Board.

(Refer to Removal of SS-Board)

2. Remove the flexible cables from the connectors (SS65,

SS67).

3. Remove the screws and then remove SS2-Board.

1. Disconnect the Speaker lead.

• Push the speaker terminal hook and pull out the speaker

lead (+).

2. Remove 5 screws ( ) and then remove the Speaker

Block.

3. Remove 2 screws (B) from each Speaker Block and then

remove the Speaker. 

1. Remove the screws and then remove the Hanger Metal

(R) and Stand Cover (R).

2. Remove 15 screws ( ).
3. Remove 6 screws ( ) and then remove the Contact Metal

(Bottom).

4. Remove the screws.
5. Remove the flexible cables from the connectors (C10,

CB1, CB2, CB3, CB4, CB5)and then remove C1-Board.

1. Remove the Contact Metal (Bottom).

(Refer to Removal of C1-Board)

2. Remove the screws and then remove the Hanger Metal

(L) and Stand Cover (L).

35

TH-65PB2E

3. Disconnect the connector (C24), and remove the flexible

cables from the connectors (C20, C21, C26, CB6, CB7,
CB8, CB9, CB10, CB11).

4. Remove the screws and then remove C2-Board.

1. Remove the Fan Block (C).

(Refer to Removal of Fan)

2. Remove the Hanger Metal (L) and Stand Cover (L).

(Refer to Removal of C2-Board)

3. Remove the Contact Metal (Bottom).

(Refer to Removal of C1-Board)

4. Remove the flexible cables from the connectors (C31,

C36, CB12, CB13, CB14, CB15).

5. Remove screws and then remove C3-Board.

1. Remove 2 screws (C) and then remove the S1-Board

Block.

2. Disconnect the connector (S34).
3. Remove 1 screw (D) and then remove S1-Board.

• Tighten the screws in order of (1) - (2).

1. Remove the S1-Board Block.

(Refer to Removal of S1-Board)

2. Disconnect the connectors (A11, A22).
3. Remove the screws.

4. Pull the bottom of the Cabinet Block forward and lift.

1. Remove the screws and then remove the Glass Holder

Assy (left, right, top, bottom).

2. Remove the Front Glass.

• Attach the Glass Holder Assy firmly (in order of 1 - 2 - 3).
• When attaching the Glass Holder Assy (top), attach it in

downward direction.

• When attaching the Glass Holder Assy (left, right), attach

it in upward direction.

36

TH-65PB2E

• Paste the Front Glass Sponges in order along each

Glass Holder Assy left and right, top and bottom. 

• The sponges are parts which cannot be recycled. Please

use the new article when you exchange the Front Glass.

1. Remove the screws and then remove the Glass Holder

Assy (left, right, bottom).

2. Remove 1 screw (E).
3. Disconnect the connector (V11) and then remove V1-

Board.

4. Remove 3 hooks and then remove the Power Button and

Power Button Spring.

5. Disconnect the connector (V22) and then remove V2-

Board.

6. Remove 2 hooks and then remove the 5 Key Button from

V2-Board.

1. Remove the Front Glass.

(Refer to Removal of Front Glass)

2. Remove V1-Board and V2-Board.

(Refer to Removal of V1-Board and V2-Board)

3. Remove the LED Panel, Photo IC Receive Panel and

Remote Sensor Panel, and then remove the Cabinet
Assy.

• The C1, C2, C3 Boards are connected with the plasma

• About the enclosed thing for line processing of the

plasma display panel for repair
Although two kinds of enclosed things for line processing are
contained in the plasma display for repair for this unit, in this
unit, please use the enclosed thing of a white tape and per-
form line processing.
(The enclosed thing of double sided tape is not used)

• Note: when removing parts

Please remove the clamper and tape of cables beforehand.

• Please do not remove the nonwoven fabric stuck on the

plasma panel for repair of this unit. 

1. Remove the S1-Board Block.

(Refer to Removal of S1-Board)

2. Disconnect the connectors (A11, A22).
3. Remove the screws.