Panasonic TH-58PH10BK / TH-58PH10EK Service Manual ▷ View online
16. Remove SU-Board and SD-Board.
(Refer to Removal of SU-Board and SD-Board)
17. Remove 10 screws and then remove SC-Board.
18. Remove SS2-Board and SS3-Board.
(Refer to Removal of SS2-Board and SS3-Board)
19. Disconnect the connectors (SS33, SS34, SS35).
20. Remove the Flexible Cables from the connectors (SS53,
20. Remove the Flexible Cables from the connectors (SS53,
SS54, SS55, SS56).
21. Remove 7 screws and then remove SS-Board.
22. Remove 2 screws ( ) and then remove the S1-Board Block.
23. Remove 1 screw ( ) and then remove the Wire Support.
23. Remove 1 screw ( ) and then remove the Wire Support.
24. Remove 3 screws and then remove the AC-Inlet Block.
25. Remove the Flexible Cables from the connectors (C10,
25. Remove the Flexible Cables from the connectors (C10,
C20, C22, C32).
26. Remove 8 screws of the Escutcheon.
27. Remove the 10 Spacers and Spacer Rings from the Plasma
Panel.
17
TH-58PH10BK / TH-58PH10EK
Caution:
· Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel,
and install Spacer and Spacer Ring in an original
installation place after exchanging the Plasma
Panel.
and install Spacer and Spacer Ring in an original
installation place after exchanging the Plasma
Panel.
28. Lift up the bottom of the Plasma Panel in the direction of the
arrow 1 and pull the Plasma Panel in the direction of the
arrow 2 and then remove the Plasma Panel.
arrow 2 and then remove the Plasma Panel.
18
TH-58PH10BK / TH-58PH10EK
7 Location of Lead Wiring
7.1. Location of Lead Wiring (1)
The lead wiring is dressed as shown in figure.
19
TH-58PH10BK / TH-58PH10EK
7.2. Location of Lead Wiring (2)
The lead wiring is dressed as shown in figure.
20
TH-58PH10BK / TH-58PH10EK
Click on the first or last page to see other TH-58PH10BK / TH-58PH10EK service manuals if exist.