Panasonic TH-58PH10BK / TH-58PH10EK Service Manual ▷ View online
6.14.2. Removal of C2-Board
1. Remove 3 screws and then remove the AC-Inlet Block.
2. Remove the Flexible Cables from the connectors (C20,
C21, C22).
3. Remove 8 screws ( ) and then remove the Flexible Cables
from the connectors (CB5, CB6, CB7, CB8).
4. Remove 6 screws ( ) and then remove C2-Board.
6.14.3. Removal of C3-Board
1. Remove 1 screw and then remove the Wire Support.
2. Remove the Flexible Cable from the connector (C32).
3. Disconnect the connectors (C33, C35).
4. Remove 6 screws ( ) and then remove the Flexible Cables
3. Disconnect the connectors (C33, C35).
4. Remove 6 screws ( ) and then remove the Flexible Cables
from the connectors (CB9, CB10, CB11).
5. Remove 5 screws ( ) and then remove C3-Board.
6.15. Removal of S1-Board
1. Remove 2 screws (H) and then remove the S1-Board Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (J) and then remove S1-Board.
2. Disconnect the connector (S34).
3. Remove 1 screw (J) and then remove S1-Board.
13
TH-58PH10BK / TH-58PH10EK
6.16. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 9 screws and then remove the 3 Fan Blocks.
2. Remove 9 screws and then remove the 3 Fan Blocks.
3. Remove each 4 screws (K) and then remove the Fans.
4. Reassemble the Fans in reverse order.
5. Stick the Cushion (Fan) around the Fan.
5. Stick the Cushion (Fan) around the Fan.
Note:
The Cushion of Fan is not re-usable.
Please use a new one when Fan exchange.
Please use a new one when Fan exchange.
6.17. Removal of V1-Board, V2-
Board and Operation Button
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 8 screws of the Escutcheon.
3. Remove 8 screws of the Escutcheon.
4. Pull the bottom of the Plasma Panel forward (arrow1).
5. Slide the Plasma Panel and then remove the Plasma Panel
5. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
6. Remove 20 screws and then remove the Fixed Angle (A, B,
C).
7. Remove 1 screw (L).
8. Disconnect the connector (V2) and then remove V1-Board.
9. Remove the Operation Button from V2-Board.
10. Disconnect the connector (V15) and then remove V2-
8. Disconnect the connector (V2) and then remove V1-Board.
9. Remove the Operation Button from V2-Board.
10. Disconnect the connector (V15) and then remove V2-
Board.
14
TH-58PH10BK / TH-58PH10EK
6.18. Removal of Escutcheon and
Front Glass
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 8 screws of the Escutcheon.
3. Remove 8 screws of the Escutcheon.
4. Pull the bottom of the Plasma Panel forward (arrow1).
5. Slide the Plasma Panel and then remove the Plasma Panel
5. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
6. Remove 25 screws and then remove the Fixed Angle (A, B,
C, D).
7. Remove the Front Glass.
Note: when Front Glass is exchanged
· Along each fixed Angles of an top and bottom, right
and left order and the sponge for the Front Glass is
pasted to the Front Glass.
pasted to the Front Glass.
Note
· The sponges are parts which cannot be recycled.
Please use the new article when you exchange the
Front Glass.
Front Glass.
8. Remove 1 screw (L) and then remove V1-Board.
9. Remove V2-Board and Operation Button.
9. Remove V2-Board and Operation Button.
15
TH-58PH10BK / TH-58PH10EK
6.19. Removal of Plasma Panel
1. Disconnect the Fan Relay Connectors.
2. Remove 9 screws and then remove the 3 Fan Blocks.
2. Remove 9 screws and then remove the 3 Fan Blocks.
3. Remove 8 screws and then remove the Reinforcement
Angle (L, R).
4. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
5. Remove the Flexible Cable from the connector (DS1).
6. Remove 4 screws and then remove the Slot Block.
6. Remove 4 screws and then remove the Slot Block.
7. Disconnect the connector (DN6).
8. Remove 4 screws and then remove DN-Board.
8. Remove 4 screws and then remove DN-Board.
9. Remove 3 screws and then remove the Fixed Plate.
10. Disconnect the connectors (P2, P9, P11, P12, P25).
11. Remove 8 screws ( ) and then remove P-Board.
12. Remove 2 screws ( ) and then remove the Speaker
11. Remove 8 screws ( ) and then remove P-Board.
12. Remove 2 screws ( ) and then remove the Speaker
Terminal Block (L, R).
13. Disconnect the connector (D20).
14. Remove the Flexible Cables from the connectors (C11,
14. Remove the Flexible Cables from the connectors (C11,
C21).
15. Remove 4 screws and then remove D-Board.
16
TH-58PH10BK / TH-58PH10EK
Click on the first or last page to see other TH-58PH10BK / TH-58PH10EK service manuals if exist.