Panasonic TH-58PF11EK Service Manual ▷ View online
25
TH-58PF11EK
8.17.3.
Removal of C3-Board
1. Remove the Fan Block (2).
(Refer to Removal of Fan)
2. Remove 4 screws and then remove the Reinforcement
Angle (L).
3. Remove 10 screws and then remove the Heat-sinks.
4. Disconnect the connectors (C33, C35).
5. Remove the flexible cables from the connectors (C36,
5. Remove the flexible cables from the connectors (C36,
CB11, CB12, CB13, CB14, CB15).
6. Remove 5 screws and then remove C3-Board.
8.18. Removal of S1-Board
1. Remove 2 screws (H) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (J) and then remove S1-Board and the
3. Remove 1 screw (J) and then remove S1-Board and the
SW Attachment.
4. Remove the SW Attachment from S1-Board.
8.19. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 8 screws.
3. Remove 8 screws.
4. Pull the bottom of the Plasma Display Panel forward
(arrow1).
5. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
26
TH-58PF11EK
8.19.1. Removal of Front Glass
1. Remove 25 screws and then remove the Fixed Angles
(top, bottom, left, right).
2. Remove the Front Glass.
Note: when Front Glass is exchanged
• Paste the Sponges in order along each Fixed Angles
(top, bottom, left, right).
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
8.19.2. Removal of V1-Board and V2-Board
1. Remove 20 screws and then remove the Fixed Angles
(bottom, left, right).
2. Remove 1 screw (K).
3. Disconnect the connector (V2) and then remove V1-
3. Disconnect the connector (V2) and then remove V1-
Board.
4. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
5. Disconnect the connector (V15) and then remove V2-
Board.
6. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
8.19.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Exchange the Cabinet Assy.
4. Exchange the Cabinet Assy.
27
TH-58PF11EK
8.20. Removal of Plasma Display
Panel
The C1, C2, C3 Boards are connected with the Plasma Dis-
play Panel for the repair.
play Panel for the repair.
1. Disconnect the Fan Relay Connectors.
2. Remove 8 screws and then remove the Fan Blocks (1, 2).
3. Disconnect the connectors (DN3, DN5).
4. Remove the flexible cables from the connectors (DN1,
4. Remove the flexible cables from the connectors (DN1,
DN2).
5. Remove 4 screws and then remove the DN-Board Block.
6. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
7. Remove 4 screws and then remove the Slot Block.
8. Disconnect the connector (D25).
9. Remove the flexible cables from the connectors (C11,
9. Remove the flexible cables from the connectors (C11,
C21, C22, SC20).
10. Remove 4 screws and then remove D-Board.
11. Disconnect the connectors (P2, P9, P11, P12).
12. Remove 8 screws and then remove P-Board (MULTI), P-
Board (SUS) and Fixed Plate.
28
TH-58PF11EK
13. Remove 2 screws and then remove the Speaker Terminal
Blocks (L), (R).
14. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5).
15. Disconnect the connectors (SU41, SD42, SD46).
16. Remove 12 screws and then remove SU-Board and SD-
16. Remove 12 screws and then remove SU-Board and SD-
Board.
17. Remove 8 screws and then remove SC-Board.
18. Disconnect the connectors (C33, SS02, SS03, SS34).
19. Remove the flexible cables from the connectors (SS54,
19. Remove the flexible cables from the connectors (SS54,
SS55).
20. Remove 6 screws and then remove SS-Board.
Click on the first or last page to see other TH-58PF11EK service manuals if exist.