Panasonic TH-58PF11EK Service Manual ▷ View online
21
TH-58PF11EK
8.8.
Removal of DN-Board
1. Disconnect the connectors (DN3, DN5, DN9, PB31,
PB32, PB33, PB34, PB35, PB38).
2. Remove the flexible cables from the connectors (DN1,
DN2).
3. Remove 2 screws ( ) and then remove the PB-Board
Block.
4. Remove 2 screws ( ) and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.
mode after DN-Board exchange.
8.9.
Removal of D-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Disconnect the connectors (D3, D5, D25).
3. Remove the flexible cables from the connectors (D20,
3. Remove the flexible cables from the connectors (D20,
D31, D32, D33).
4. Remove 4 screws and then remove D-Board.
8.10. Removal of P-Board
1. Disconnect the connectors (P2, P6, P7 P9, P11, P12,
P25).
2. Remove 8 screws and then remove P-Board (MULTI), P-
Board (SUS) and Fixed Plate.
8.11. Removal of H3-Board (L), (R)
1. Remove 2 screws and then remove the Speaker Terminal
Blocks (L), (R).
2. Disconnect the connector (H37)
3. Remove 6 screws (G) and then remove H3-Board.
3. Remove 6 screws (G) and then remove H3-Board.
22
TH-58PF11EK
8.12. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 8 screws and then remove the Fan Blocks (1, 2).
3. Remove 4 screws and then remove the Fan (A).
4. Remove 20 screws and then remove the Fans (B, C, D,
E, F).
5. Reassemble the Fans in reverse order.
6. Stick the Fan Sponge around the Fan.
6. Stick the Fan Sponge around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
Please use a new one when Fan exchange.
8.13. Removal of SU-Board and SD-
Board
1. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
SD11).
23
TH-58PF11EK
2. Disconnect the connectors (SU41, SD42, SD46).
3. Remove 12 screws and then remove SU-Board and SD-
3. Remove 12 screws and then remove SU-Board and SD-
Board.
8.14. Removal of SC-Board
1. Disconnect the connectors (SC2, SU41, SD42, SD46).
2. Remove the flexible cable from the connector (SC20).
3. Remove 14 screws and then remove SC-Board.
2. Remove the flexible cable from the connector (SC20).
3. Remove 14 screws and then remove SC-Board.
8.15. Removal of SS-Board
1. Disconnect the connectors (SS02, SS03, SS11, SS12,
SS33, SS34).
2. Remove the flexible cables from the connectors (SS54,
SS55).
3. Remove 6 screws and then remove SS-Board.
8.16. Removal of SS2-Board and
SS3-Board
1. Disconnect the connectors (SS02, SS03, SS35).
2. Remove the flexible cables from the connectors (SS52,
2. Remove the flexible cables from the connectors (SS52,
SS57).
24
TH-58PF11EK
3. Remove 6 screws and then remove SS2-Board and SS3-
Board.
8.17. Removal of C1, C2, C3-Board
8.17.1.
Removal of C1-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 4 screws and then remove the Reinforcement
Angle (R).
3. Remove 10 screws and then remove the Heat-sinks.
4. Remove the flexible cables from the connectors (C10,
C11, CB1, CB2, CB3, CB4, CB5).
5. Remove 5 screws and then remove C1-Board.
8.17.2.
Removal of C2-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 3 screws and then remove the AC-Inlet Block.
3. Remove 10 screws and then remove the Heat-sinks.
4. Remove the flexible cables from the connectors (C20,
C21, C22, C26, CB6, CB7, CB8, CB9, CB10).
5. Remove 4 screws and then remove C2-Board.
Click on the first or last page to see other TH-58PF11EK service manuals if exist.