Panasonic TH-50PV7F / TH-50PV7P / TH-50PX7B / TH-50PX7E Service Manual ▷ View online
6.10. Remove the SS2-Board
1. Disconnect the connector (SS23) and disconnect the
flexible cable (SS52).
2. Remove the screws (×2
) and remove the SS2-Board.
6.11. Remove the SS3-Board
1. Disconnect the connector (SS24) and disconnect the
flexible cable (SS57).
2. Remove the screws (×2
) and remove the SS3-Board.
6.12. Remove the SS-Board
1. Disconnect the connectors (SS11, SS12 SS23, SS24,
SS33, SS34 and SS35).
2. Disconnect the flexible cables (SS54 and SS55).
3. Remove the screws (×7
3. Remove the screws (×7
) and remove the SS-Board.
6.13. Remove the stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered) with the
plasma panel surface facing downward.
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×5
each) and remove the stand brackets (left, right).
13
TH-50PV7F / TH-50PV7P / TH-50PX7B / TH-50PX7E
6.14. Remove the C1-Board
1. Remove the tuner unit. (See section 6.4.)
2. Remove the stand bracket (L). (See section 6.13.)
3. Remove the flexible cables holder fastening screws (×10
2. Remove the stand bracket (L). (See section 6.13.)
3. Remove the flexible cables holder fastening screws (×10
).
4. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and
CB5).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×5
6. Remove the screws (×5
) and remove the C1-Board.
6.15. Remove the C2-Board
1. Remove the tuner unit. (See section 6.4.)
2. Remove the flexible cables holder fastening screws (×6
2. Remove the flexible cables holder fastening screws (×6
).
3. Disconnect the flexible cables (CB6, CB7 and CB8).
4. Disconnect the flexible cables (C20, C21 and C22).
5. Remove the screws (×4
4. Disconnect the flexible cables (C20, C21 and C22).
5. Remove the screws (×4
) and remove the C2-Board.
6.16. Remove the C3-Board
1. Remove the tuner unit. (See section 6.4.)
2. Remove the stand bracket (R). (See section 6.13.)
3. Remove the flexible cables holder fastening screws (×6
2. Remove the stand bracket (R). (See section 6.13.)
3. Remove the flexible cables holder fastening screws (×6
).
4. Disconnect the flexible cables (CB9, CB10 and CB11).
5. Disconnect the flexible cable (C32).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (×4
5. Disconnect the flexible cable (C32).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (×4
) and remove the C3-Board.
6.17. Remove the speaker L, R
1. Disconnect the connector (DG12). (See section 6.4.)
2. Remove the screws (×4
2. Remove the screws (×4
each) and remove the speaker
L, R.
6.18. Remove the S-Board
1. Remove the screws (×2
) and remove the S-Board metal
frame.
2. Disconnect the connector (S1).
3. Remove the screws (×2
3. Remove the screws (×2
) and remove the S-Board.
14
TH-50PV7F / TH-50PV7P / TH-50PX7B / TH-50PX7E
6.19. Remove the K-Board
1. Remove the S-Board. (See section 6.18.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (DG1). (See section 6.4.)
4. Remove the screws (×3
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (DG1). (See section 6.4.)
4. Remove the screws (×3
) and remove the K-Board.
5. Disconnect the connectors (K1) and remove the K-Board.
6.20. Remove the Plasma panel
section from the Cabinet assy
(glass)
(glass)
1. Remove the stand brackets (left, right) fastening screw (×1
each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×6
).
3. For leaving the plasma panel from the front frame, pull the
bottom of the front frame forward, lift, and remove.
4. Remove the spacers and spacer rings (×6
).
15
TH-50PV7F / TH-50PV7P / TH-50PX7B / TH-50PX7E
6.21. Replace the plasma panel
(finished)
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
surface facing downward.
2. Attach the C1-Board, C2-Board and the C3-Board, connect
the flexible cables (×22) from the plasma panel to the C1-
Board, C2-Board and the C3-Board, and fit the flexible
cable holders.
Board, C2-Board and the C3-Board, and fit the flexible
cable holders.
3. Attach the Hooks (left, right) and fit the stand brackets (L,
R) to the new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the cabinet assy and each P.C.Board and so on, to
5. Attach the cabinet assy and each P.C.Board and so on, to
the new plasma panel.
*When fitting the cabinet assy, be careful not to allow
any debris, dust or handling residue to remain between
the front glass and plasma panel.
*When fitting the cabinet assy, be careful not to allow
any debris, dust or handling residue to remain between
the front glass and plasma panel.
16
TH-50PV7F / TH-50PV7P / TH-50PX7B / TH-50PX7E
Click on the first or last page to see other TH-50PV7F / TH-50PV7P / TH-50PX7B / TH-50PX7E service manuals if exist.