Panasonic TH-50PH30E / TH-50PH30ER Service Manual ▷ View online
25
TH-50PH30E / TH-50PH30ER
2. Remove the Front Glass.
Note: when fixing fixed Angle (upper-rear, bottom-
rear)
• Firstly screw on 6 screws (1-2) in order.
Note: when Front Glass is exchanged
• Paste the Front Glass Sponges in order along each
Fixed Angles left and right, upper and bottom.
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
8.14.2. Removal of V1-Board and V2-Board
1. Remove the Front Glass.
(Refer to remove of Front Glass).
2. Remove the Fixed Angle (bottom-front).
3. Remove 2 screws (D).
4. Disconnect the connector (V11).
4. Disconnect the connector (V11).
5. Remove 1 hook and then remove V1-Board
6. Remove 2 hooks and then remove the Power Button
6. Remove 2 hooks and then remove the Power Button
Shield.
7. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
8. Disconnect the connector (V22) and then remove V2-
Board.
9. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
8.14.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove the Rear Cover Hook (Left, Right).
5. Remove the Fixed Angle (upper-front).
5. Remove the Fixed Angle (upper-front).
26
TH-50PH30E / TH-50PH30ER
6. Remove the Cabinet Assy.
8.15. Removal of Plasma Display
Panel
The C1,C2 Boards are connected with the plasma display
panel for the repair.
panel for the repair.
1. Disconnect the Fan Relay Connector.
2. Remove 2 screws and then remove the Fan Block.
2. Remove 2 screws and then remove the Fan Block.
3. Disconnect the connector (P9).
4. Remove 2 screws ( ) and then remove the AC Inlet
4. Remove 2 screws ( ) and then remove the AC Inlet
Block.
5. Disconnect the connectors (A8, A11, A16, A22).
6. Remove the flexible cables from the connector (D15).
7. Remove 2 screws ( ).
6. Remove the flexible cables from the connector (D15).
7. Remove 2 screws ( ).
8. Remove 2 screws ( ) and then remove the A-Board
Block.
9. Remove 1 screw and then remove the Speaker Terminal
Block.
10. Disconnect the connector (S34).
11. Remove 2 screws (E) and then remove the S1-Board
Block.
27
TH-50PH30E / TH-50PH30ER
12. Remove the flexible cables from the connectors (SN21,
SN22, SN23, SN24, SN25, SN26).
13. Disconnect the connectors (SN2, SN3).
14. Remove the flexible cables from the connector (SN20).
15. Remove 6 screws and then remove SN-Board.
14. Remove the flexible cables from the connector (SN20).
15. Remove 6 screws and then remove SN-Board.
16. Disconnect the connector (SS11).
17. Remove the flexible cables from the connectors (C23,
17. Remove the flexible cables from the connectors (C23,
SS52, SS55).
18. Remove 3 screws and then remove SS-Board.
19. Disconnect the connectors (C25, D25).
20. Remove the flexible cables from the connectors (C11,
20. Remove the flexible cables from the connectors (C11,
C21).
21. Remove 4 screws and then remove D-Board.
22. Remove 5 screws and then remove P-Board.
23. Remove the flexible cable from the connectors (C10,
C20).
24. Remove 7 screws ( ).
Note: when fixing Handle Fixing Metal (L, R)
• Screw on 2 screws (1) firstly.
25. Pull the bottom of the Plasma Display Panel forward
(arrow1).
28
TH-50PH30E / TH-50PH30ER
26. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
27. Remove 12 screws and then remove the Hanger Metal L,
the Hanger Metal R, the Stand Pole Bracket (L, R) and
the Hanger Fixing Metal (L, R).
the Hanger Fixing Metal (L, R).
28. Exchange the Plasma Display Panel.
Click on the first or last page to see other TH-50PH30E / TH-50PH30ER service manuals if exist.