DOWNLOAD Panasonic TH-50PH30E / TH-50PH30ER Service Manual ↓ Size: 8 MB | Pages: 127 in PDF or view online for FREE

21

TH-50PH30E / TH-50PH30ER

• To disassemble P.C.B., wait for 1 minute after power was off

for discharge from electrolysis capacitors.

•

,  ,  , ,  

and  

marks 

indicate 

screw 

positions.

1. Remove screws (

×17 , 

×23  ) and then remove the

Rear Cover.

1. Disconnect the connector (D25).
2. Remove the flexible cable from the connectors (D15,

D20, D31, D32).

3. Remove 4 screws and then remove the D-Board.

1. Disconnect the connector (A14).

2. Remove 2 Hexagonal-Head screws, 4 screws ( ) and 2

screws ( ) and 1 screw ( ) and then remove the HX-
Board Block.

3. Turn over the HX-Board Block.
4. Disconnect the connector (HX1).
5. Remove 4 Hexagonal-Head screws and 1 screw of HX-

Board and then remove HX-Board.

1. Remove the HX-Board Block.

(Refer to Removal of HX-Board)

2. Disconnect the connectors (A8, A11, A16, A22, A31).
3. Remove the flexible cables from the connector (A5).
4. Remove 4 screws and then remove A-Board.

22

TH-50PH30E / TH-50PH30ER

• Put the flexible Cable between the Fixed Metal and A-

Board when Connect the flexible Cable to the connector
(A5).

1. Disconnect the Fan Relay Connector.
2. Remove 2 screws and then remove the Fan Block.

3. Remove 1 screw and then remove the Fan from the Fan

Fixed Metal.

4. Remove each 4 Fan Corner Sponge from the Fan.

5. Reassemble the Fan in reverse order.
6. Stick the Fan Sponge around the Fan.

The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.

1. Disconnect the connectors (P2, P9, P11, P16, P25, P34,

P35).

2. Remove 9 screws and then remove P-Board.

1. Disconnect the connector (P9).
2. Remove 2 screws ( ) and then remove the AC Cord

Clamper A.

3. Remove 1 screw ( ) and then remove the AC Inlet Assy.

1. Disconnect the connector (H37).
2. Remove 1 screw and then remove the Speaker Terminal

Block (H3-Board).

1. Disconnect the connectors (SN2, SN3).
2. Remove the flexible cable from the connectors (SN20,

SN21, SN22, SN23, SN24, SN25, SN26).

23

TH-50PH30E / TH-50PH30ER

3. Remove 6 screws and then remove SN-Board.

1. Disconnect the connectors (A8, A11, A16, A22, A31).
2. Remove the flexible cables from the connector (A5).
3. Remove 2 screws ( ).
4. Remove 2 screws ( ) and then remove the A-Board

Block.

• Put the flexible Cable between the Fixed Metal and A-

Board when Connect the flexible Cable to the connector
(A5).

5. Disconnect the connectors (SS3, SS11).
6. Remove the flexible cables from the connectors (SS23,

SS52, SS55).

7. Remove 3 screws and then remove SS-Board.

1. Remove the Fan Block.

(Refer to remove of Fan).

2. Remove the Speaker Terminal Block.

(Refer to remove of Speaker Terminal Block).

3. Disconnect the connector (P9).
4. Remove 2 screws ( ) and then remove the AC Inlet

Block Block.

5. Remove 5 screws and then remove the Hanger Metal R

and the Stand Pole Bracket Assy (R).

6. Remove the flexible cables from the connectors (C10,

C11).

7. Remove 8 screws ( ) and then remove the flexible

cables from the connectors (CB1, CB2, CB3, CB4).

24

TH-50PH30E / TH-50PH30ER

8. Remove 4 screws ( ) and then remove C1-Board.

1. Remove the Fan Block.

(Refer to remove of Fan).

2. Remove the AC Inlet Block.

(Refer to remove of Slot Block).

3. Remove the A-Board Block.

(Refer to remove of SS-Board).

4. Remove 5 screws and then remove the Hanger Metal L

and the Stand Pole Bracket Assy (L).

5. Disconnect the connector (C25).
6. Remove the flexible cables from the connectors (C20,

C21, C23).

7. Remove 8 screws ( ) and then remove the flexible

cables from the connectors (CB5, CB6, CB7, CB8).

8. Remove 4 screws ( ) and then remove C2-Board.

1. Remove 2 screws (B) and then remove the S1-Board

Block.

2. Disconnect the connector (S34).

3. Remove 1 screw (C) and then remove S1-Board.

1. Remove the Speaker Terminal Block.

(Refer to remove of Speaker Terminal Block).

2. Remove the S1-Board Block.

(Refer to Removal of S1-Board)

3. Disconnect the connectors (A11, A22).
4. Remove 9 screws ( ).

5. Pull the bottom of the Plasma Display Panel forward

(arrow1).

6. Slide the Plasma Display Panel and then remove the

Plasma Display Panel (arrow2).

1. Remove 24 screws and then remove the Fixed Angle

(left, right, upper-rear, bottom-rear).