Panasonic TH-50PF30E / TH-50PF30ER Service Manual ▷ View online
25
TH-50PF30E / TH-50PF30ER
5. Remove 4 screws ( ) and then remove SC-Board.
8.13. Removal of SS-Board
1. Disconnect the connectors (A5, A11, A13, A16, A22,
A37).
2. Remove the flexible cables from the connectors (A1,
A15).
3. Remove 2 screws ( ).
4. Remove 2 screws ( ) and then remove the A-Board
4. Remove 2 screws ( ) and then remove the A-Board
Block.
Note: when fixing A-Board Block
• Put the flexible Cable between the Fixed Metal and A-
Board when Connect the flexible Cable to the connector
(A1).
(A1).
5. Disconnect the connectors (SS11).
6. Remove the flexible cables from the connectors (SS33,
6. Remove the flexible cables from the connectors (SS33,
SS53, SS54, SS56).
7. Remove 7 screws and then remove SS-Board.
8.14. Removal of C1-Board
1. Remove the flexible cable from the connector (C10).
2. Remove 3 screws ( ) and then remove the flexible
2. Remove 3 screws ( ) and then remove the flexible
cables from the connectors (CB1, CB2, CB3).
3. Remove 3 screws ( ) and then remove C1-Board.
8.15. Removal of C2-Board
1. Remove the Fan Block.
(Refer to remove of Fan).
2. Remove the Slot Block.
(Refer to remove of Slot Block).
3. Remove 5 screws and then remove the Hanger Assy R
and the Stand Pole Bracket Assy (R).
4. Remove the flexible cables from the connectors (C20,
C21, C26).
26
TH-50PF30E / TH-50PF30ER
5. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CB4, CB5, CB6, CB7, CB8,
CB9).
CB9).
6. Remove 4 screws ( ) and then remove C2-Board.
8.16. Removal of C3-Board
1. Remove the Fan Block (A).
(Refer to remove of Fan).
2. Remove the Slot Block.
(Refer to remove of Slot Block).
3. Remove the A-Board Block.
(Refer to remove of SS-Board).
4. Remove 5 screws and then remove the Hanger Assy L
and the Stand Pole Bracket Assy (L).
5. Disconnect the connectors (C35).
6. Remove the flexible cables from the connectors (C31,
6. Remove the flexible cables from the connectors (C31,
C33, C36).
7. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CB10, CB11, CB12, CB13,
CB14, CB15).
CB14, CB15).
8. Remove 4 screws ( ) and then remove C3-Board.
8.17. Removal of S1-Board
1. Remove 2 screws (B) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (C) and then remove S1-Board.
3. Remove 1 screw (C) and then remove S1-Board.
8.18. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the Speaker Terminal Block.
(Refer to remove of H3-Board Block).
2. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
3. Disconnect the connectors (A11, A22).
4. Remove 7 screws ( ) and then remove the Handle Fixing
4. Remove 7 screws ( ) and then remove the Handle Fixing
Metal (L, R).
5. Remove 2 screws ( ).
Note: when fixing Handle Fixing Metal (L, R)
• Screw on 2 screws (1) firstly.
6. Pull the bottom of the Plasma Display Panel forward
(arrow1).
27
TH-50PF30E / TH-50PF30ER
7. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
8.18.1. Notice when Front Glass or Cabinet
Assy is exchanged
Please use the Aluminum Tapes when you exchange the Front
Glass or the Cabinet Assy.
Paste the Aluminum Tapes to original position.
Glass or the Cabinet Assy.
Paste the Aluminum Tapes to original position.
8.18.2. Removal of Front Glass
1. Remove 24 screws and then remove the Fixed Angle
(left, right, upper-rear, bottom-rear).
2. Remove the Front Glass.
Note: when fixing Fixed Angle (upper-rear, bottom-
rear)
• Firstly screw on 6 screws (1-2) in order.
Note: when Front Glass is exchanged
• Paste the Front Glass Sponges in order along each
Fixed Angles left and right, upper and bottom.
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
8.18.3. Removal of V1-Board and V2-Board
1. Remove the Front Glass.
(Refer to remove of Front Glass).
2. Remove the Fixed Angle (bottom-front).
3. Remove 2 screws (D).
4. Disconnect the connector (V11).
4. Disconnect the connector (V11).
28
TH-50PF30E / TH-50PF30ER
5. Remove 1 hook and then remove V1-Board
6. Remove 2 hooks and then remove the Power Button
6. Remove 2 hooks and then remove the Power Button
Shield.
7. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
8. Disconnect the connector (V22) and then remove V2-
Board.
9. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
8.18.4. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove the Rear Cover Hook (Left, Right).
5. Remove the Fixed Angle (upper-front).
5. Remove the Fixed Angle (upper-front).
6. Remove the Cabinet Assy.
8.19. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the plasma dis-
play panel for the repair.
play panel for the repair.
1. Disconnect the Fan Relay Connectors.
2. Remove 2 screws and then remove the Fan Block (A).
2. Remove 2 screws and then remove the Fan Block (A).
3. Disconnect the Fan Relay Connectors.
Click on the first or last page to see other TH-50PF30E / TH-50PF30ER service manuals if exist.