Panasonic TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B Service Manual ▷ View online
3. For leaving the plasma panel from the front frame, pull the
bottom of the front frame forward, lift, and remove.
6.34. Replace the plasma panel
(finished).
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
surface facing downward.
2. Attach the C1-Board and the C2-Board, connect the flexible
cables (×7) from the Plasma panel to the C1-Board and C2-
Board, and fix the flexible cable holders.
Board, and fix the flexible cable holders.
3. Attach the Hooks (left, right) and fit the stand brackets (left,
right) to the new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the front frame and the each P.C.Board and so on,
5. Attach the front frame and the each P.C.Board and so on,
to the new plasma panel.
* When fitting the front frame, be careful not to allow
any debris, dust or handling residues to remain
between the front glass and plasma panel.
* When fitting the front frame, be careful not to allow
any debris, dust or handling residues to remain
between the front glass and plasma panel.
21
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
7 Location of Lead Wiring
7.1. Lead of Wiring (1)
TH-37PV500E/B
MAKE WIRE DRESSING AS IF ILLUSTRATED BELOW.
NOTES:
1. CONNECT CONNECTORS SURELY.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. PLACE SAG OF P2 CONNECTION WIRES UNDER KNEES OF THE P2 CONNECTOR AS IF ILLUSTRATED BELOW.
4. MANAGE THE WIRES THAT ARE AROUND ELECTRIC FAN ASSEMBLIES NOT TO TOUCH A BLADE OF ELECTRIC
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. PLACE SAG OF P2 CONNECTION WIRES UNDER KNEES OF THE P2 CONNECTOR AS IF ILLUSTRATED BELOW.
4. MANAGE THE WIRES THAT ARE AROUND ELECTRIC FAN ASSEMBLIES NOT TO TOUCH A BLADE OF ELECTRIC
FAN NOR THE EDGE OF FAN MOUNT METAL.
22
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
7.2. Lead of Wiring (2)
TH-42PV500E/B
MAKE WIRE DRESSING AS IF ILLUSTRATED BELOW.
NOTES:
1. CONNECT CONNECTORS SURELY.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. PLACE SAG OF P2 CONNECTION WIRES UNDER KNEES OF THE P2 CONNECTOR AS IF ILLUSTRATED BELOW.
4. MANAGE THE WIRES THAT ARE AROUND ELECTRIC FAN ASSEMBLIES NOT TO TOUCH A BLADE OF ELECTRIC
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. PLACE SAG OF P2 CONNECTION WIRES UNDER KNEES OF THE P2 CONNECTOR AS IF ILLUSTRATED BELOW.
4. MANAGE THE WIRES THAT ARE AROUND ELECTRIC FAN ASSEMBLIES NOT TO TOUCH A BLADE OF ELECTRIC
FAN NOR THE EDGE OF FAN MOUNT METAL.
23
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
7.3. Lead of Wiring (3)
TH-37PV500E/B
MAKE WIRE DRESSING AS IF ILLUSTRATED BELOW.
NOTES:
1. CONNECT CONNECTORS SURELY.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. PLACE SAG OF P2 CONNECTION WIRES UNDER KNEES OF THE P2 CONNECTOR AS IF ILLUSTRATED BELOW.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. PLACE SAG OF P2 CONNECTION WIRES UNDER KNEES OF THE P2 CONNECTOR AS IF ILLUSTRATED BELOW.
24
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
Click on the first or last page to see other TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B service manuals if exist.