Panasonic TH-42PS10AK / TH-42PS10AS / TH-42PS10MK / TH-42PS10MS / TH-42PS10GK Service Manual ▷ View online
6 Disassembly
·
To disassemble P.C.B., wait for 1 minute after power was
off for discharge from electrolysis capacitors.
off for discharge from electrolysis capacitors.
·
and
marks indicate screw positions.
6.1. Removal of Rear Cover
1. Remove screws (×17
, ×7
, ×4
) and then remove
Rear Cover.
6.2. Removal of HU-Board
1. Remove 4 screws (A) and then remove the HU Terminal
Block.
2. Remove 4 screws (B).
3. Remove 3 screws (C) and then remove the HU-Board.
6.3. Removal of Slot Block
1. Remove the HU Terminal Block.
(Refer to Removal of HU-Board)
2. Disconnect the connectors.
(DS1,DS2,DS4,DS6,DS8,DS15)
3. Remove 4 screws and then remove the Slot Block.
6.4. Removal of DS-Board
1. Remove the HU Terminal Block.
(Refer to Removal of HU-Board)
2. Remove Slot Block.
(Refer to Removal of Slot Block)
3. The Slot Block is turned inside out.
4. Disconnect the connector (DS14).
5. Remove 6 screws and then remove the Slot Cover.
9
TH-42PS10AK / TH-42PS10AS / TH-42PS10MK / TH-42PS10MS / TH-42PS10GK
6. Remove 6 screws and then remove DS-Board.
6.5. Removal of HX-Board
1. Remove the HU Terminal Block.
(Refer to Removal of HU-Board)
2. Remove the Slot Block.
(Refer to Removal of Slot Block)
3. Remove DS-Board.
(Refer to Removal of DS-Board)
4. Remove 2 screws and then remove the Slot Case.
5. Remove 4 Hexagonal-Head screws and 2 screws and then
remove HX-Board.
6.6. Removal of DN-Board
1. Disconnect the connector(DN5).
2. Remove
the
Flexible
Cables
from
the
connectors
(DN1,DN2).
3. Remove 4 screws and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS mode
after DN-Board exchange.
after DN-Board exchange.
6.7. Removal of P-Board
1. Disconnect the connectors(P2, P5, P9, P10, P11, P12,
P23, P25).
2. Remove 6 screws and then remove P-Board.
10
TH-42PS10AK / TH-42PS10AS / TH-42PS10MK / TH-42PS10MS / TH-42PS10GK
6.8. Removal of D-Board
1. Remove Slot Block.
(Refer to Removal of Slot Block)
2. Disconnect the connectors(D5, D20, D25).
3. Remove the Flexible Cables from the connectors (D3, D31,
D32).
4. Remove 4 screws and then remove D-Board.
6.9. Removal of H3-Board (L, R)
1. Remove 2 screw and then remove the Speaker Terminal
Block (L, R).
2. Disconnect the connector(H37).
3. Remove 3 screws (D) and then remove H3-Board.
6.10. Removal of SU-Board and SD-
Board
1. Remove 4 screws.
2. Remove the Flexible Cables from the connectors(SU1,
SU2, SU3).
3. Remove the Flexible Cables from the connectors(SD1,
SD2, SD3).
4. Disconnect the connectors(SU45, SD46).
5. Slide SU-Board and SD-Board to the left, remove SU-Board
and SD-Board from the connectors(SC41, SC42).
6. Remove SU-Board and SD-Board.
11
TH-42PS10AK / TH-42PS10AS / TH-42PS10MK / TH-42PS10MS / TH-42PS10GK
6.11. Removal of SC-Board
1. Disconnect the connectors(SU45, SD46).
2. Remove 4 screws and then slide SU-Board and SD-Board
to the left, remove SU-Board and SD-Board from the
connectors(SC41, SC42).
connectors(SC41, SC42).
3. Disconnect the connectors(SC2, SC20, SC23).
4. Remove 6 screws and then remove SC-Board.
6.12. Removal of SS-Board
1. Disconnect the connectors(SS11, SS12, SS23, SS34).
2. Remove the Flexible Cables from the connectors(SS41,
SS42, SS43, SS44).
3. Remove 6 screws and then remove SS-Board.
6.13. Removal of C1, C2-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove H3-Board (L,R).
(Refer to Removal of H3-Board (L,R))
3. Remove 6 screws and then remove the Stand Block (L,R).
6.13.1. Removal of C1-Board
1. Remove the Flexible Cables from the connectors(C11,
C12).
2. Remove 6 screws ( ) and then remove the Flexible Cables
from the connectors(CB1, CB2, CB3).
3. Remove 3 screws ( ) and then remove C1-Board.
12
TH-42PS10AK / TH-42PS10AS / TH-42PS10MK / TH-42PS10MS / TH-42PS10GK
Click on the first or last page to see other TH-42PS10AK / TH-42PS10AS / TH-42PS10MK / TH-42PS10MS / TH-42PS10GK service manuals if exist.