DOWNLOAD Panasonic TH-42PH30ER Service Manual ↓ Size: 7.81 MB | Pages: 124 in PDF or view online for FREE

21

TH-42PH30ER

• To disassemble P.C.B., wait for 1 minute after power was off

for discharge from electrolysis capacitors.

•

,  ,  , ,  

and  

marks 

indicate 

screw 

positions.

1. Remove screws (

×17 , 

×23  ) and M8 CAP (×4 )

then remove the Rear Cover.

1. Disconnect the connector (D25).
2. Remove the flexible cables from the connectors (D15,

D20, D31, D32).

3. Remove 4 screws and then remove the D-Board.

1. Disconnect the connector (A14).

2. Remove 2 Hexagonal-Head screws, 4 screws ( ) and 2

screws ( ) and 1 screw ( ) and then remove the HX-
Board Block.

3. Turn over the HX-Board Block.
4. Disconnect the connector (HX1).
5. Remove 4 Hexagonal-Head screws and 1 screw of HX-

Board and then remove HX-Board.

1. Remove the HX-Board Block.

(Refer to Removal of HX-Board)

2. Disconnect the connectors (A8, A11, A14, A16, A22).
3. Remove the flexible cable from the connector (A5).
4. Remove 4 screws and then remove A-Board.

22

TH-42PH30ER

1. Disconnect the connectors (P2, P9, P11, P16, P25, P34,

P35).

2. Remove 5 screws and then remove P-Board.

1. Disconnect the connector (P9).
2. Remove 2 screws ( ) and then remove the AC Cord

Clamper A.

3. Remove 1 screw ( ) and then remove the AC Inlet Assy. 

1. Disconnect the connector (H37).
2. Remove 1 screw and then remove the Speaker Terminal

Block.

3. Remove 2 screws (A) and then remove H3-Board.

1. Remove the Speaker Terminal Block.

(Refer to Removal of H3-Board)

2. Remove the flexible cables from the connectors (SN11,

SN12, SN13, SN14, SN15, SN16, SN17, SN18).

3. Disconnect the connectors (SN2, SN3).
4. Remove the flexible cable from the connector (SN20).
5. Remove 6 screws and then remove SN-Board.

23

TH-42PH30ER

1. Disconnect the connectors (A8, A11, A16, A22).
2. Remove the flexible cable from the connector (A5).
3. Remove 2 screws ( ).
4. Remove 2 screws ( ) and then remove the A-Board

Block.

5. Disconnect the connectors (SS3, SS11).
6. Remove the flexible cables from the connectors (SS23,

SS53A, SS55A).

7. Remove 3 screws and then remove SS-Board.

1. Remove 2 screws (B) and then remove the S1-Board

Block.

2. Disconnect the connector (S34).

3. Remove 1 screw (C) and then remove S1-Board.

1. Remove the Speaker Terminal Block.

(Refer to remove of H3-Board).

2. Disconnect the connectors (P9).
3. Remove 2 screws ( ) and then remove the AC Inlet

Block.

4. Remove 5 screws and then remove the Hanger Metal (R)

and the Stand Pole Bracket (R).

5. Remove the flexible cables from the connectors (C10,

C11).

6. Remove 8 screws ( ) and then remove the flexible

cables from the connectors (CB1, CB2, CB3, CB4).

24

TH-42PH30ER

7. Remove 4 screws ( ) and then remove C1-Board.

1. Remove the AC Inlet Block.

(Refer to remove of C1-Board).

2. Remove the A-Board Block

(Refer to remove of SS-Board).

3. Remove 5 screws and then remove the Hanger Metal (L)

and the Stand Pole Bracket (L).

4. Disconnect the connector (C25).
5. Remove 8 screws ( ) and then remove the flexible

cables from the connectors (C20, C21, C23, CB5, CB6,
CB7, CB8).

6. Remove 4 screws ( ) and then remove C2-Board.

1. Remove the Speaker Terminal Block.

(Refer to remove of H3-Board).

2. Remove the S1-Board Block.

(Refer to Removal of S1-Board)

3. Disconnect the connectors (A11, A22).

4. Remove 9 screws ( ) and then remove the Handle Fixing

Metal (L, R).

• Screw on 2 screws (1) firstly.

5. Pull the bottom of the Plasma Display Panel forward

(arrow1).

6. Slide the Plasma Display Panel and then remove the

Plasma Display Panel (arrow2).

1. Remove 21 screws and then remove the Fixed Angle

(left, right, upper-rear, bottom-rear).

2. Remove the Front Glass.

• Firstly screw on 6 screws (1-2) in order.