Panasonic TH-42PG10A / TH-42PG10G / TH-42PG10M Service Manual ▷ View online
6 Disassembly
·
To disassemble P.C.B., wait for 1 minute after power was
off for discharge from electrolysis capacitors.
off for discharge from electrolysis capacitors.
·
and
marks indicate screw positions.
6.1. Removal of Rear Cover
1. Remove screws (×6
, ×6
, ×14
, ×8
) and then
remove the Rear Cover.
6.2. Removal of HA-Board
1. Remove 4 screws (D) and then remove the HA Terminal
Block.
2. Remove 4 screws (E).
3. Remove 3 screws (F) and then remove HA-Board.
6.3. Removal of Slot Block
1. Disconnect the connectors (DS1, DS4, DS6, DS7).
2. Remove 4 screws and then remove the Slot Block.
3. Disconnect the connectors(DS2, DS8, DS15).
6.4. Removal of DS-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Disconnect the connector(DS14).
3. The Slot Block is turned inside out.
4. Remove 6 screws and then remove the Slot Cover.
5. Remove 6 screws and then remove DS-Board.
9
TH-42PG10A / TH-42PG10G / TH-42PG10M
6.5. Removal of HX-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove DS-Board.
(Refer to Removal of DS-Board)
3. Remove 2 screws and then remove the Slot Case.
4. Remove 4 Hexagonal-Head screws and 2 screws and then
remove HX-Board.
6.6. Removal of Speaker(L, R)
1. Connected terminal hook is pushed, and the speaker lead
in 4 places is pulled out.
2. Remove 8 screws and then remove the Speaker(L, R).
6.7. Removal of DN-Board
1. Disconnect the connector(DN6).
2. Remove the Flexible Cable from the connector(DN1,DN2).
3. Remove 4 screws and then remove DN-Board and the
Fixed Plate.
Note:
A re-setup of the destination is performed by MS mode
after DN-Board exchange.
after DN-Board exchange.
10
TH-42PG10A / TH-42PG10G / TH-42PG10M
6.8. Removal of P-Board
1. Disconnect the connectors(P2, P5, P9, P10, P11, P23,
P25)
2. Remove 6 screws and then remove P-Board.
6.9. Removal of D-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Disconnect the connectors(D5, D20, D25)
3. Remove the Flexible Cables from the connectors (D3, D31,
D32).
4. Remove 4 screws and then remove D-Board.
6.10. Removal of SU-Board and SD-
Board
1. Remove the Flexible Cables from the connectors(SU1,
SU2, SU3, SD1, SD2, SD3).
2. Remove 4 screws.
3. Disconnect the connectors(SU45, SD46).
4. Slide SU-Board and SD-Board to the left, remove SU-Board
and SD-Board from the connectors(SC41, SC42).
11
TH-42PG10A / TH-42PG10G / TH-42PG10M
6.11. Removal of SC-Board
1. Disconnect the connectors(SU45, SD46).
2. Remove 4 screws ( ) and then slide SU-Board and SD-
Board to the left.
3. Disconnect the connectors(SC2, SC20, SC23).
4. Remove 6 screws and then remove SC-Board.
6.12. Removal of SS-Board
1. Disconnect the connectors(SS11, SS12, SS23, SS34).
2. Remove the Flexible Cables from the connectors(SS41,
SS42, SS43, SS44)
3. Remove 6 screws and then remove SS-Board.
6.13. Removal of C1, C2-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 1 screws ( ) and then remove the Ferrite Core
from the Stand Block( R).
3. Remove 12 screws ( ) and then remove the Stand Block(L,
R).
12
TH-42PG10A / TH-42PG10G / TH-42PG10M
Click on the first or last page to see other TH-42PG10A / TH-42PG10G / TH-42PG10M service manuals if exist.