DOWNLOAD Panasonic TH-103PF10UK / TH-103PF10EK Service Manual ↓ Size: 10.76 MB | Pages: 127 in PDF or view online for FREE

TH-103PF10UK/EK

9

TH-103PF10UK/EK

10

200 V - 240V AC, 50 / 60Hz 

220 V - 240 V AC, 50 / 60Hz 

Power on (UK)  

1,550 W

Power on (EK)  

1,500 W

Stand-by condition

Save OFF 1.0 W, Save ON 0.9 W 

Power off condition

0.5 W 

Drive method: AC type 103-inch, 16:9 aspect ratio

89.5” (2,269 mm) (W) 

× 50.5” (1,277 mm) (H) × 103” (2,604 mm) (diagonal)

(No. of pixels)

2,073,600 (1,920 (W) 

× 1,080 (H)) [5,760 × 1,080 dots]

Temperature

32 

°F - 104 °F (0 °C - 40 °C)

Humidity

20 % - 80 %

Scanning format

525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /

60i 60p 50i 50p 24p 25p 30p 24sF,1250 (1080) / 50i

PC signals

VGA, SVGA, XGA, SXGA, 
 
UXGA ..... (compressed) 
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz

HDMI A-B (UK)

TYPE A Connector x 2

DVI-D (EK)

Video Input

DVI-D 24 Pin 

× 1

compliance with DVI Revision 1.0

Audio Input

Stereo mini jack (M3) 

× 1

0.5Vrms 

Content Protection

Compatible with HDCP 1.1

COMPONENT / RGB IN

Y / G (BNC)

with / sync 1.0 Vp-p (75-ohm)

P

B

 / B (BNC), P

R

 / R (BNC)

0.7 Vp-p (75-ohm)

AUDIO IN (RCA PIN JACK 

× 2)

0.5 Vrms

PC IN

(HIGH-DENSITY Mini D-SUB 15PIN)

Y or G with / sync 1.0 Vp-p (75-ohm)
Y or G without / sync 0.7 Vp-p (75-ohm)

B / P

B

 / C

B

:

0.7 Vp-p (75-ohm)

R / P

R

 / C

R

:

0.7 Vp-p (75-ohm)

HD / VD:

1.0 - 5.0 Vp-p (high impedance)

VBS (use HD port) (EK)

with / picture 1.0 Vp-p (high impedance)  
without / picture 0.3 Vp-p (high impedance) 

AUDIO IN (M3 JACK)

0.5 Vrms (high impedance)

SERIAL

EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) 

RS-232C COMPATIBLE

AUDIO OUT

RCA PIN JACK 

× 2 (L / R)

 

OUTPUT LEVEL : VARIABLE (-

 -  0 dB)

 
[INPUT 1KHz / 0dB, 10Kohm Load]

Remote Control Transmitter
(UK)

EUR7636070R

Remote Control Transmitter
(EK)

EUR7636090R

Batteries (UK)

AA Size x 2

Batteries (EK)

R6 Size x 2

Fixing bands

(TMME203) 

× 2

× H × D)

95.0” (2,414 mm) 

× 56.0” (1,421 mm) × 5.0” (129 mm) (5.6” (141 mm) when including protruding portion of

slots)

main unit only (UK)

approx. 485.0 lbs

main unit only (EK)

approx. 220.0 kg net 

 

• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards EN55022, EN55024, EN61000-3-2, EN61000-3-3. (TH-103PF10EK)

TH-103PF10UK/EK

11

To exit the CAT mode, access the ID mode and switch off the main power.

Select the IIC mode by Up / Down button on the remote control at the front page of CAT mode and then press the Action button
on the remote control.

Subject and item are mentioned on “IIC mode structure”.

To exit the IIC mode, press the R button on the remote control.

TH-103PF10UK/EK

12

Select the CD mode by Up / Down button on the remote control at the front page of CAT mode and then press the Mute button on
the remote control more than 3 seconds.

Microcomputer software version (IC4002), this version can be upgrade by

1. replace of new version IC
2. Loading the new version software from loader tool, TZSC07036.

Memory data change

To exit the CD mode, press the R button on the remote control.

Select the SD mode by Up / Down button on the remote control at the front page of CAT mode and then press the Action button
on the remote control.

To exit the SD mode, press the R button on the remote control.