Panasonic TH-103PF10UK / TH-103PF10EK Service Manual ▷ View online
TH-103PF10UK/EK
37
4. Remove 2 screws (
) and then remove the Rear Cover
Angle (H).
5. Remove 2 Eye Bolt Covers.
6. Remove 5 screws (
) and then remove the Rear Cover
Angle (F).
7. Remove 6 screws and then remove the Reinforcement
Angle (F).
8. Remove the flexible cables from the connectors (SS36,
SS37, SS59, SS60, SS61, SS62).
9. Remove 6 screws and then remove SS3-Board.
7.25. Removal of SS-Board
1. Remove the Side Angle (L).
(Refer to Removal of Side Angle (L),(R))
2. Disconnect the Fan relay connectors.
3. Remove 4 screws and then remove the Fan Block (F),
3. Remove 4 screws and then remove the Fan Block (F),
(G).
4. Remove the flexible cables from the connectors (SS21,
SS23, SS26, SS27, SS55, SS56, SS57, SS58).
5. Disconnect the connectors (SS2, SS13, SS35, SS42,
SS44).
6. Remove 13 screws and then remove SS-Board.
TH-103PF10UK/EK
38
7.26. Removal of Fan
1. Disconnect the Fan relay connectors.
2. Remove each 4 screws of Fan Block (A), (B), (E), (H), (J)
2. Remove each 4 screws of Fan Block (A), (B), (E), (H), (J)
and then remove the Fan Blocks.
3. Remove each 4 screws of Fan (C), (F), (G) and then
remove the Fans.
4. Remove each 3 screws of Fan (D), (K) and then remove
the Fans.
5. Remove each 4 screws and then remove the Fans.
TH-103PF10UK/EK
39
Note:
• The Sponge (of Fans) is not re-useable.
Please use a new one when Fan exchange.
7.27. Removal of C1-Board
1. Remove 2 screws (
) of Side Angle (R).
2. Remove 6 screws (
) and then remove the Reinforce-
ment Angle (A).
3. Remove 4 screws of the flexible cable.
4. Disconnect the connector (C14).
5. Remove the flexible cables from the connectors (CA1,
4. Disconnect the connector (C14).
5. Remove the flexible cables from the connectors (CA1,
CA2, C11).
6. Remove 4 screws and then remove C1-Board.
7.28. Removal of C2-Board
1. Remove the Fan Block (A), (B).
(Refer to Removal of Fan)
2. Remove the Eye Bolt and Eye Bolt Cover.
3. Remove 5 screws and then remove the Rear Cover Angle
3. Remove 5 screws and then remove the Rear Cover Angle
(A).
TH-103PF10UK/EK
40
4. Remove the Reinforcement Angle (A).
(Refer to Removal of C1-Board)
5. Remove 6 screws of the flexible cable.
6. Remove the flexible cables from the connectors (CA3,
6. Remove the flexible cables from the connectors (CA3,
CA4, CA5, C20, C21, C23).
7. Disconnect the connectors (C22, C24).
8. Remove 6 screws and then remove C2-Board.
7.29. Removal of C3-Board
1. Remove the Eye Bolt.
2. Remove 5 screws and then remove the Rear Cover Angle
2. Remove 5 screws and then remove the Rear Cover Angle
(C).
3. Remove 6 screws and then remove the Reinforcement
Angle (C).
4. Remove 6 screws of the flexible cable.
5. Remove the flexible cables from the connectors (CA6,
5. Remove the flexible cables from the connectors (CA6,
CA7, CA8, C31, C32).
6. Disconnect the connector (C34).
7. Remove 5 screws and then remove C3-Board.
Click on the first or last page to see other TH-103PF10UK / TH-103PF10EK service manuals if exist.