Panasonic CF-29NTQGZBM Service Manual ▷ View online
7-19
n
Arranging the SW LED PCB
1. Attach the Power SW PCB Cushion and the two Tape CPU to the PW LED PCB.
2. Bend the PW LED PCB as shown.
3. Connect the Power SW Cable to the Connector on the PW LED PCB.
0~0.5mm
Component side
0~0.5mm
0.5±0.5mm
1±1mm
2±2mm
1±1mm
Foil side
PW LED PCB
PW LED PCB
Power SW PCB Cushion
Tape CPU
PW LED PCB
PW LED PCB
White line
White line
1
2
Bend
180
Bend
180
Safety Working
PW LED PCB
Connector
Power SW Cable
Safety Working
7-20
n
Arranging the Power SW Cable
View "A"
SW LED PCB
Power SW Cable
Power SW Cable
Power SW Cable
Tape
Tape
CON Spacer
CON Spacer
Top Cabinet
Top Cabinet
CON Spacer
View "A"
View "B"
0~2mm
0~2mm
0~0.5mm
3~4mm
0~2mm
View "B"
0±0.5mm
Set the Cable along a
connector side, not to prop.
connector side, not to prop.
Do not put up the Cable on the Cabinet.
Safety Working
7-21
7.2.8.
Setting the IO PCB
1. Fix the IO PCB using the six Screws<d>. No1 to No6
Note:
Tighten the Screws in the numbered order (No1 to No6).
Screws <d>: DFHE5058ZB
n
Arrange the IO FPC
<d>
:No2
<d>
:No3 <d>
:No4
<d>
:No5 <d>
:No6
<d>
:No1
IO PCB
Rear I/O FPC Cover Sheet
View "B"
View "A"
View "A"
View "B"
<No good>
2~3mm
R0.5~1.0mm
LID SW
Cushion
Cushion
IO FPC
R1.5~2.5mm
0±0.3mm
IO FPC
White line
Bend
180
180
Bend
90
90
White line
LID SW Cushion
LID SW Cushion
White line
White line
IO FPC
White line
White line
1~1.5mm
Bend
180
180
Bend
90
90
Bend
90
90
Bend
90
90
Front side
Back side
0~0.5mm
0±0.5mm
0±0.5mm
Attention when bending the FPC
1. Inside of bending should be from R0.5mm to
1. Inside of bending should be from R0.5mm to
R1mm.
2. Do not mistake the direction of bending.
3. For bending point, it should be within 0.5mm from
3. For bending point, it should be within 0.5mm from
the white line unless there is a regulation.
Safety Working
7-22
n
Setting the IO FPC
n
Setting the IO PCB and attaching the Rear I/O FPC Cover
Sheet
IO PCB
IO FPC
FCC CN Stopper
Rear I/O FPC
Cover Sheet
Cover Sheet
IO PCB
IO PCB
IO FPC
Rib
LID SW
Cushion
Cushion
Slot
Rib
Do not put up the
IO FPC on the Rib.
IO FPC on the Rib.
Do not put up the Rear
I/O FPC Cover Sheet
on the Rib.
I/O FPC Cover Sheet
on the Rib.
Click on the first or last page to see other CF-29NTQGZBM service manuals if exist.