Panasonic CF-18 Service Manual ▷ View online
7
PC Card Slots
Modem
LAN
USB Ports
DC IN 16.0 V
DC-IN Jack
Use this port to a serial mouse or serial
communication devices.
communication devices.
A cable can be connected to prevent
theft of your computer. For more infor-
mation, read the manual provided with
the cable.
LOCK
Use only a monaural condenser micro-
phone (miniature jack). Using an input
source other than a monaural condenser
microphone may not allow audio to be
input or may damage the equipment.
Microphone Jack
Use this jack to connect headphones or
amplifier-equipped speakers. Audio
output from the internal speaker is dis-
abled when headphones or external
speakers are connected.
amplifier-equipped speakers. Audio
output from the internal speaker is dis-
abled when headphones or external
speakers are connected.
Headphone Jack
Security Lock
Serial Port
External Display Port
The strap has been designed to carry only the weight of the
computer. Therefore, be sure that the strap does not carry a weight
that exceeds the weight of the computer. The strap may acci-
dentally come loose from the computer.
Do not use a strap that is damaged or about to tear.
computer. Therefore, be sure that the strap does not carry a weight
that exceeds the weight of the computer. The strap may acci-
dentally come loose from the computer.
Do not use a strap that is damaged or about to tear.
CAUTION
The hand strap can be attached to any two of the four corners using
screws (A) which were used to attach the hand strap.
Adjust the length of the belt so that the computer does not fall by mis-
take, and firmly hold the computer when using it.
screws (A) which were used to attach the hand strap.
Adjust the length of the belt so that the computer does not fall by mis-
take, and firmly hold the computer when using it.
(The above illustration shows the position
where the hand strap is attached at the factory.)
where the hand strap is attached at the factory.)
Hand Strap
3 Block Diagram
System Confugration Diagram
8
4
9
5 I/O Address Map
10
0x0081-0x008F
Direct memory access controller
0x00C0-0x00DF
Direct memory access controller
0x0020-0x0021
Programmable interrupt controller
0x00A0-0x00A1
Programmable interrupt controller
0x0040-0x0043
System timer
0x0061-0x0061
System speake
0x0070-0x0071
System CMOS/real time clock
0x00F0-0x00FF
Numeric data processor
0x0062-0x0062
Microsoft ACPI-Compliant Embedded Controller
0x0066-0x0066
Microsoft ACPI-Compliant Embedded Controller
0x0060-0x0060
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
0x0064-0x0064
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
0x03F8-0x03FF
Communications Port (COM1)
0x02F8-0x02FF
Communications Port (COM2)
0x1810-0x181F
Intel(R) 82801DBM Ultra ATA Storage Controller
0x01F0-0x01F7
Primary IDE Channel
0x03F6-0x03F6
Primary IDE Channel
0x1100-0x111F
Intel(R) 82801DB/DBM SMBus Controller
0x1C00-0x1CFF
SigmaTel C-Major Audio
0x18C0-0x18FF
SigmaTel C-Major Audio
0x2400-0x24FF
Agere Systems AC'97 Modem
0x2000-0x207F
Agere Systems AC'97 Modem
0x0000-0x0CF7
PCI bus
0x0000-0x0CF7
Direct memory access controller
0x0D00-0xFFFF
PCI bus
0x1800-0x1807
Intel(R) 82852/82855 GM/GME Graphics Controller
0x03B0-0x03BB
Intel(R) 82852/82855 GM/GME Graphics Controller
0x03C0-0x03DF
Intel(R) 82852/82855 GM/GME Graphics Controller
0x1820-0x183F
Intel(R) 82801DB/DBM USB Universal Host Controller
0x1840-0x185F
Intel(R) 82801DB/DBM USB Universal Host Controller
0x1860-0x187F
Intel(R) 82801DB/DBM USB Universal Host Controller
0xFF00-0xFFFF
Generic CardBus Controller
0xFD00-0xFDFF
Generic CardBus Controller
0xDFF0-0xDFFF
PCMCIA IDE/ATAPI Controller
0xFC00-0xFCFF
Generic CardBus Controller
0xFB00-0xFBFF
Generic CardBus Controller
0x3000-0x30FF
Realtek RTL8139 Family PCI Fast Ethernet NIC
0x0A79-0x0A79
ISAPNP Read Data Port
0x0279-0x0279
ISAPNP Read Data Port
0x0274-0x0277
ISAPNP Read Data Port
Click on the first or last page to see other CF-18 service manuals if exist.