DOWNLOAD Panasonic CF-18 Service Manual ↓ Size: 6.84 MB | Pages: 99 in PDF or view online for FREE

Power off the computer. Do not shut down to the Suspend or
Hibernation mode.
Do not add peripherals while the computer ius in the Suspend
or Hibernation mode; abnormal operation may result.
For the Screw tightening torque, please refer to [ 8. Exploded
View].

Figure 1

1. Open the Battery Cover.
2. Remove the Battery Pack.
3. Open the HDD Cover.
4. Remove the HDD Pack.

Figure 2

5. Remove the two Screws. <A>
6. Remove the HDD Case A and the HDD Case B.
7. Remove the HDD.

Screw<A>: DFHE5025XA

Figure 3

1. Remove the Palm Rest Ass’y.
2. Remove the four Screws. <B>
3. Remove the KBD Plate.

Figure 4

4. Remove the Keyboard.

Figure 5

5. Remove the three Screws. <C>
6. Remove the KBD Connector Cover.

1

2

3

Battery Pack

HDD Pack

HDD Case B

HDD Case A

HDD FPC

HDD

Heater

<A>

<A>

Hooks

Hooks

<B>

<B>

<B>

KBD Plate

KBD Plate

Palm Rest Ass'y

<B>

1

2

Keyboard

<C>

KBD

Connector

Cover

23

Figure 6

7. Disconnect the Cable from Connector (CN18).
8. Remove the TP Tape.
9. Disconnect the Cable from Connector (CN800).

10. Remove the Touch Pad and Click Button Plate.

Screw<B>: DXSB2+5FZL

<C>: DFHE5025XA

Figure 7

1. Remove the four Screws. <D>
2. Disconnect the Cable from Connector (CN37).
3. Remove the two Screws. <E>
4. Remove the Speaker Angle.

Screw<D>: DXQT2+D25FZL

<E>: DXQT2+D3FZLT

Figure 8

1. Remove the thirteen Screws. <F>
2. Remove the Rear Cabinet.

Screw<F>: DXYN2+J8FZL

Figure 9

1. Remove the five Screws. <G>
2. Remove the DU Lid Angle and DU Lid.

Screw<G>: DXQT2+D3FZLT

<F>

<F>

<F>

<F>

<F>

<F>

<F>

<F>

<F>

<F>

<F>

<F>

<F>

Keyboard

Keyboard 

FPC

Connector

 (CN18)

Connector

(CN800)

TP Tape

Touch Pad

Click Button

Panel

<D>

DIMM LID Sheet

DIMM LID

Speaker Unit

Speaker

Waterproof

Sheet

Speaker Washer

Speaker Angle

Connector (CN37)

Speaker Cable

Tube

<E> <D>

<D>

<E><D>

<G>

<G>

<G>

<G>

<G>

DU LID

DU LID Angle

24

Figure 10

1. Remove the two Screws. <H>
2. Disconnect the two Cables from two Connectors (CN701,

CN702).

3. Remove the Audio PCB.

Screw<H>: DXSB2+5FZL

Figure 11

1. Disconnect the two Antenna Cables from two Connectors

(J5, J6).

2. Remove the Wireless Module.
3. Remove the three Screws. <I>
4. Remove the Port PCB.
5. Remove the Screw. <J>
6. Remove the Modem PCB.
7. Remove the two Screws. <K>
8. Remove the BAT CON angle.

Screw<I>: DXSB2+5FZL

<J>: XSB2+4FNL
<K>: DXSB2+5FZL

<K>

<J>

<K>

<I>

<I>

Bat Con Angle

Connector (J5)

Connector (J6)

Modem 
PCB

Port PCB

Wireless Module

<I>

Figure 12

1. Disconnect the eight Cables from eight Connectors (CN3,

CN9, CN12, CN14, CN23, CN30, CN35, CN36).

2. Remove the Screw. <L>
3. Remove the two Screws. <M>
4. Remove the four Screws. <N>
5. Remove the Main PCB.
6. Disconnect the two Cables from two Connectors (CN8,

CN17).

7. Remove the PCMCIA Unit.

Screw<L>: DXSB2+5FZL

<M>: DXYN2+J12FNL
<N>: DXYN2+J18FNL

Figure 13

1. Disconnect the Cable from Connector (CN801).
2. Remove the three Screws. <O>
3. Remove the PAD PCB.
4. Remove the four Screws. <P>
5. Remove the two Screws. <Q>
6. Remove the I/O PCB.

Screw<O>: DFHE5025XA

<P>: DFHE5058ZA
<Q>: DXSB2+5FZL

Connector (CN702)

Connector (CN701)

Audio PCB

<H>

<L>

<M>

<M>

<N>

<N>

<N>

<N>

HDD Guid Plate

Connector (CN36)

Connector (CN35)

Connector (CN30)

PCMCIA Unit

to Connector (CN17)

Connector (CN3)

Connector (CN17)

Connector (CN8)

Connector (CN9)

Connector (CN14)

Connector (CN12)

LAN Cable

Main PCB

to Connector (CN8)

Connector
(CN23)

<O>

<O>

<O>

<Q>

<P>

<Q>

I/O PCB

PAD PCB

Connector 
(CN801)

25

Figure 14

1. Remove the LED Waterproof Sheet.
2. Remove the LED PCB.
3. Remove the Switch PCB.
4. Remove the Power Switch.

Figure 15

1. Remove the three Screws. <R>
2. Remove the CPU Heat Plate.
3. Remove the Lithium Battery.

Screw<R>: DFHE5025XA

Figure 16

1. Remove the four Screws. <S>
2. Remove the LCD Hinge Cover.

Figure 17

3. LCD is half-rotated. Removes the two Screws. <T>
4. Remove the Hinge Cover.

Figure 18

5. Remove the four Screws. <U>
6. Remove the Display Unit.

Screw<S>: DFHE5025XA

<T>: DXSB2+5FZL
<U>: DXYN4+J8FNL

LED Waterproof Sheet

LED PCB

Power 

Switch 

Knob

Operation Sheet

Switch PCB

<R>

<R>

<R>

CPU Heat Plate

Lithium Battery

<T>

<T>

Hinge Cover

<S>

<S>

LCD Hinge Cover

<S>

<S>

<U> <U>

<U>

<U>

26