DOWNLOAD Panasonic KX-UDT121RU (serv.man4) Service Manual ↓ Size: 2.03 MB | Pages: 72 in PDF or view online for FREE

21

Icons and information shown on the display will vary depending on the context. To select an item shown on the display, press the
corresponding soft key.

Opens the phonebook.
Pressing this key for more than 2 seconds
locks the phonebook.

Used to save a setting.

Displayed when in Phonebook Lock.
Pressing this key and then entering the
password (default: not registered), unlocks
the phonebook temporarily.
Pressing for more than 2 seconds, then
entering the password (default: not
registered), unlocks the phonebook.
If no password has been set, you cannot lock
the phonebook. For details about setting the
password.

Clears digits or characters.

Stores a new item in the phonebook.

Turns the microphone mute feature on or off
during a conversation.
Flashes when Mic Mute is on.

Make a call.

Turns the ringer off.

Activate/deactivate Noise Reduction.

Opens the main menu.
When in standby mode, pressing this key for
than 2 seconds locks all keys.

Used to set the Alarm.

Returns to the previous display.

Reject an incoming call.

Opens the list menu (edit/delete in the
phonebook, etc.).

Establishes a multiple-party conversation
(Conference).

Confirms the entry.

Searches for an item in the phonebook
alphabetically.

Displayed when in Key Lock mode. Pressing
this key for more than 2 seconds unlocks the
keys.

Displayed when in Latin character entry
mode.
Pressing this key switches to Numeric
character entry mode.

Advances to the next display.

Displayed when in Numeric character entry
mode.
Pressing this key switches to Greek
character entry mode.

Used to delete the setting.

Displayed when in Greek character entry
mode.
Pressing this key switches to Special
Character (Extended 1) character entry
mode.

Displayed when in Special character
(Extended 2) entry mode.
Pressing this key switches to Latin character
entry mode.

22

• The display of the soft keys can be customised. The soft keys displayed in standby mode or during a call can be set. The names

of the soft keys can also be edited.

Displayed when in Special character
(Extended 1) entry mode.
Pressing this key switches to Special
character (Extended 2) character entry
mode.

Used to select an item when in setting mode.

Used to set Call Forwarding and Do Not
Disturb.

Disconnects the current call and allows you
to make another call without hanging up.

Displays the Outgoing Call Log.

Used to select AM or PM when setting the
Memo Alarm feature.

Displays the last dialled number.

Perform an unscreened (blind) transfer.

Opens the Incoming Call Log.

Used to set/clear Auto Answer mode when
in standby mode. During a conversation,
turns the microphone mute feature on or off.
For details about the Mute/Auto Answer
function.

Displayed next to an extension from which a voice mail message is waiting.

23

*1 These settings are made available through Web user interface programming. For details, consult your administrator or dealer.

Setting Handset

Incoming Option

Ringer Volume

Ring On Charger

Memo Alarm

Headset Ringer

Talk Option

Receiver Volume

Answer Option

Talk On Charger

Any Key Answer

Quick Answer

Key Option

Soft Key Name

Key Lock Type

Auto Lock Time

Display Option

Hot Key Time

Language

Tone Option

LCD Brightness

Standby Display

System Option

Category Name

Date Format

Time Format

Caller ID Disp

Colour Scheme

Power Save

Auto Ans Delay

Headset Volume

Soft Key Edit

Ringer Type

Vibrate

Speaker Volume

Headset Mic Vol

Backlight

Key Tone

Range Alarm

Register H/S

Cancel Base

Select Base

System Lock

Change PIN

H/S Information

Firmware Update *1

CS Version

Enable CS Web *1

Bluetooth Option

On/Off

Cell Phone

BT Headset

Other Option

Change Password

Reset Handset

MasterCS Address

24

You can lock all keys other than the Navigator Key while the handset is in standby mode. One of 4 key lock types can be selected.
To lock

Press and hold 

 or the [CENTER] navigation key for more than 2 seconds to lock the handset keys.

The 

 icon will be displayed to indicate that the keys are locked.

To unlock the handset keys, press and hold 

 of the [CENTER] navigation key for more than 2 seconds. 

The 

 icon will change to 

 to indicate the keys have been unlocked.

• If you select "Manual&Password" or "Auto&Password" for Key lock type, you need to enter the password to unlock the handset.
• If no password has been set, you cannot select "Manual&Password" or "Auto&Password" for Key lock type.

You can select the language displayed on your handset.

1. Press  

or 

the [CENTER] navigation key.

2. Select " 

 Setting Handset" by pressing the arrow keys, and then press 

 .

3. Press 

 or 

 to select "Display Option", and then press 

 .

4. Press 

 or 

 to select "Language", and then press 

 .

5. Press 

 or 

 to select a language*1, and then press 

 .

Full

Low

Needs to be charged

Within range of a Cell Station (CS)

(Blinking) Out of range

Off-hook Status

Phonebook

Voice Message

Bluetooth on, no Bluetooth headset 
connection

Bluetooth on, Bluetooth headset 
connected

Incoming Call Log

Outgoing Call Log

Navigation Key Guidance