Panasonic KX-TDA6181X Service Manual ▷ View online
Pin Assignments
Amphenol Connector
No. Signal Name
Function
No. Signal Name
Function
1
RA
Ring port 1
26 TA
Tip port 1
2
RB
Ring port 2
27 TB
Tip port 2
3
RC
Ring port 3
28 TC
Tip port 3
4
RD
Ring port 4
29 TD
Tip port 4
5
RE
Ring port 5
30 TE
Tip port 5
6
RF
Ring port 6
31 TF
Tip port 6
7
RG
Ring port 7
32 TG
Tip port 7
8
RH
Ring port 8
33 TH
Tip port 8
9
RI
Ring port 9
34 TI
Tip port 9
10 RJ
Ring port 10
35 TJ
Tip port 10
11 RK
Ring port 11
36 TK
Tip port 11
12 RL
Ring port 12
37 TL
Tip port 12
13 RM
Ring port 13
38 TM
Tip port 13
14 RN
Ring port 14
39 TN
Tip port 14
15 RO
Ring port 15
40 TO
Tip port 15
16 RP
Ring port 16
41 TP
Tip port 16
17-
25
25
Reserved
-
42-
50
50
Reserved
-
LED Indications
Indication
Color
Description
CARD STATUS
Green/Red
Card status indication
OFF: Power Off
Green ON: Normal (all ports are idle)
Green Flash (60 times per minute ): Normal (a port is in use)
Red ON: Fault (includes reset)
Red Flash (60 times per minute): Out of Service
OFF: Power Off
Green ON: Normal (all ports are idle)
Green Flash (60 times per minute ): Normal (a port is in use)
Red ON: Fault (includes reset)
Red Flash (60 times per minute): Out of Service
8
KX-TDA6181X
In case of install CID/PAY8 on ELCOT16 card
Function
Function
CID/PAY8: 8-port Caller ID signal type FSK/FSK (with Visual Caller ID)/DTMF, and 8 ports of Pay Tone Service (12
kHz/16kHz).To be mounted on the ELCOT16 cards.
CID8: 8-port Caller ID signal type FSK/FSK (with Visual Caller ID)/DTMF, To be mounted on the ELCOT16 cards.
kHz/16kHz).To be mounted on the ELCOT16 cards.
CID8: 8-port Caller ID signal type FSK/FSK (with Visual Caller ID)/DTMF, To be mounted on the ELCOT16 cards.
Accessories and User-supplied Items
Accessories (included): Screws X 2
User-supplied (not included): none
User-supplied (not included): none
Switch Settings (In case of install CID/PAY8 on ELCOT16 card)
Switch
Type
Usage and Status Definition
Port Setting
DIP
Set all DIP switch at “OFF” positions.
9
KX-TDA6181X
Fastening Amphenol Type Connector
An amphenol 57JE type connector is used on some of the optional sevice cards.
To connect an amphenol connector, use the spring latch or screw to fix the upper part and use Velcro
To connect an amphenol connector, use the spring latch or screw to fix the upper part and use Velcro
tape to fix the lower
part of the connector.
10
KX-TDA6181X
Using Analogue Trunk Card and Extension Card
Power Failure Connection connects a specific SLT and a trunk in the event of power failure. The following analogue trunk and
extension cards can be used for Power Failure Connections:
•
extension cards can be used for Power Failure Connections:
•
•
•
• Analogue trunk card: ELCOT16 (4 PFT ports)
•
•
•
• Extension card: EMSLC16 (4 PFT ports), ESLC16 (4 PFT ports), DHLC8 (2 PFT port) and SLC8 (2 PFT port)
To 1 analogue trunk card, connect only 1 extension card.
Note:
•
•
•
• Power Failure Connections must be made within the same shelf.
•
•
•
• By programming the Hybrid IP-PBX, a trunk conversation established during power failure can be maintained even when the
power returns and the connection is switched back to the normal maintained even when the power returns and the
connection is switched back to the normal performed, the connection will be dropped when power returns.
connection is switched back to the normal performed, the connection will be dropped when power returns.
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ11 connectors
User-supplied (not included): RJ11 connectors
11
KX-TDA6181X
Click on the first or last page to see other KX-TDA6181X service manuals if exist.