Panasonic KX-TDA6181X Service Manual ▷ View online
In case of install CID/PAY8 on ELCOT16 card
Function
Function
CID/PAY8: 8-port Caller ID signal type FSK/FSK (with Visual Caller ID)/DTMF, and 8 ports of Pay Tone Service (12
kHz/16kHz).To be mounted on the ELCOT16 cards.
CID8: 8-port Caller ID signal type FSK/FSK (with Visual Caller ID)/DTMF, To be mounted on the ELCOT16 cards.
kHz/16kHz).To be mounted on the ELCOT16 cards.
CID8: 8-port Caller ID signal type FSK/FSK (with Visual Caller ID)/DTMF, To be mounted on the ELCOT16 cards.
Accessories and User-supplied Items
Accessories (included): Screws X 2
User-supplied (not included): none
User-supplied (not included): none
Switch Settings (In case of install CID/PAY8 on ELCOT16 card)
Switch
Type
Usage and Status Definition
Port Setting
DIP
Set all DIP switch at “OFF” positions.
9
KX-TDA6181X
Fastening Amphenol Type Connector
An amphenol 57JE type connector is used on some of the optional sevice cards.
To connect an amphenol connector, use the spring latch or screw to fix the upper part and use Velcro
To connect an amphenol connector, use the spring latch or screw to fix the upper part and use Velcro
tape to fix the lower
part of the connector.
10
KX-TDA6181X
Using Analogue Trunk Card and Extension Card
Power Failure Connection connects a specific SLT and a trunk in the event of power failure. The following analogue trunk and
extension cards can be used for Power Failure Connections:
•
extension cards can be used for Power Failure Connections:
•
•
•
• Analogue trunk card: ELCOT16 (4 PFT ports)
•
•
•
• Extension card: EMSLC16 (4 PFT ports), ESLC16 (4 PFT ports), DHLC8 (2 PFT port) and SLC8 (2 PFT port)
To 1 analogue trunk card, connect only 1 extension card.
Note:
•
•
•
• Power Failure Connections must be made within the same shelf.
•
•
•
• By programming the Hybrid IP-PBX, a trunk conversation established during power failure can be maintained even when the
power returns and the connection is switched back to the normal maintained even when the power returns and the
connection is switched back to the normal performed, the connection will be dropped when power returns.
connection is switched back to the normal performed, the connection will be dropped when power returns.
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ11 connectors
User-supplied (not included): RJ11 connectors
11
KX-TDA6181X
RJ11 Connector Pin Assignments for Analogue Trunk Card
PFT Ports 1 and 2
No. Signal Name Function
1
1
R2
Ring port 2
2
R1
Ring port 1
3
T1
Tip port 1
4
T2
Tip port 2
PFT Ports 3 and 4
No. Signal Name Function
1
1
R4
Ring port 4
2
R3
Ring port 3
3
T3
Tip port 3
4
T4
Tip port 4
RJ11 Connector Pin Assignments for Extension Card
PFT Ports 1 and 2
No. Signal Name Function
1
1
T2
Tip port 2
2
T1
Tip port 1
3
R1
Ring port 1
4
R2
Ring port 2
PFT Ports 3 and 4 (for EMSLC16/ESLC16 card only)
No. Signal Name Function
1
1
T4
Tip port 4
2
T3
Tip port 3
3
R3
Ring port 3
4
R4
Ring port 4
12
KX-TDA6181X
Click on the first or last page to see other KX-TDA6181X service manuals if exist.