Panasonic KX-TDA6174XJ / KX-TDA6174X Service Manual ▷ View online
Fastening Amphenol Connector
An amphenol 57JE type connector is used on some of the optional sevice cards.
To connect an amphenol connector, use the spring latch or screw to fix the upper part and use Velcro
To connect an amphenol connector, use the spring latch or screw to fix the upper part and use Velcro
tape to fix the lower
part of the connector.
9
KX-TDA6174XJ / KX-TDA6174X
Using Analogue Trunk Card and Extension Card
Power Failure Connection connects a specific SLT and a trunk in the event of power failure. The following analogue trunk and
extension cards can be used for Power Failure Connections:
•
extension cards can be used for Power Failure Connections:
•
•
•
• Analogue trunk card: ELCOT16 (4 PFT ports)
•
•
•
• Extension card: EMSLC16 (4 PFT ports), ESLC16 (4 PFT ports), DHLC8 (2 PFT port) and SLC8 (2 PFT port)
To 1 analogue trunk card, connect only 1 extension card.
Note:
•
•
•
• Power Failure Connections must be made within the same shelf.
•
•
•
• By programming the Hybrid IP-PBX, a trunk conversation established during power failure can be maintained even when the
power returns and the connection is switched back to the normal maintained even when the power returns and the
connection is switched back to the normal performed, the connection will be dropped when power returns.
connection is switched back to the normal performed, the connection will be dropped when power returns.
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ11 connectors
User-supplied (not included): RJ11 connectors
10
KX-TDA6174XJ / KX-TDA6174X
RJ11 Connector Pin Assignments for Analogue Trunk Card
PFT Ports 1 and 2
No. Signal Name Function
1
1
R2
Ring port 2
2
R1
Ring port 1
3
T1
Tip port 1
4
T2
Tip port 2
PFT Ports 3 and 4
No. Signal Name Function
1
1
R4
Ring port 4
2
R3
Ring port 3
3
T3
Tip port 3
4
T4
Tip port 4
RJ11 Connector Pin Assignments for Extension Card
PFT Ports 1 and 2
No. Signal Name Function
1
1
T2
Tip port 2
2
T1
Tip port 1
3
R1
Ring port 1
4
R2
Ring port 2
PFT Ports 3 and 4 (for EMSLC16/ESLC16 card only)
No. Signal Name Function
1
1
T4
Tip port 4
2
T3
Tip port 3
3
R3
Ring port 3
4
R4
Ring port 4
11
KX-TDA6174XJ / KX-TDA6174X
Installing Optional Service Cards
1. Insert the card along the guide rails.
2. Holding the card as follows, push the release lever in the direction of the arrow so that the card is made to engage with the
connector on the back board securely.
3. Turn the 2 screws clockwise to fix the card.
12
KX-TDA6174XJ / KX-TDA6174X
Click on the first or last page to see other KX-TDA6174XJ / KX-TDA6174X service manuals if exist.