Panasonic KX-TDA0155CE Service Manual / Supplement ▷ View online
9
KX-TDA0155CE
5 Installation Instructions
5.1.
Connecting the Cell Station to the Hybrid IP-PBX
KX-TDA0155 connecting to KX-TDA100/KX-TDA200/KX-TDA600/KX-TDE100/KX-TDE200/KX-TDE600
Note
The illustration of the PBX is based on the KX-TDE200.
Accessories and User-supplied Items for the CS
Accessories (included): Screws x 2, Washers x 2
User-supplied (not included): RJ11 connector
User-supplied (not included): RJ11 connector
Note
For details about the DHLC/DLC card, refer to the Installation Manual for your PBX.
10
KX-TDA0155CE
KX-TDA0155 connecting to KX-NCP500/KX-NCP1000
Note
The illustration of the PBX is based on the KX-NCP500.
Accessories and User-supplied Items for the CS
Accessories (included): Screws x 2, Washers x 2
User-supplied (not included): RJ11 connector
User-supplied (not included): RJ11 connector
Note
For details about the DHLC/DLC card, refer to the Installation Manual for your PBX.
11
KX-TDA0155CE
5.2.
Connectiong the CS
1. Connect the cable from CSIF card to the CS.
2. Pass the cable through the groove of the CS (in any direction depending on your preference).
12
KX-TDA0155CE
6 Test Mode
6.1.
Required Equipment
1. Personal Computer with serial port.
2. Servuce Jig cable (PSZZ2CA155EU)
3. TEL cord
4. Power Supply Adaptor (PSZZ1TDA0142)
5. AC Adaptor (KX-TCA1 / KX-A11 / PSLP1434)
6. Maintenance software for PC (PSZZ3TD7896M)
2. Servuce Jig cable (PSZZ2CA155EU)
3. TEL cord
4. Power Supply Adaptor (PSZZ1TDA0142)
5. AC Adaptor (KX-TCA1 / KX-A11 / PSLP1434)
6. Maintenance software for PC (PSZZ3TD7896M)
6.2.
Initial Setting
1. Connect TDA0155CE to your PC with the RS-232C cable, and then power on TDA0155CE with a Power Supply Adaptor.
2. Set DIP switch pin 2 to 6 from OFF to ON.
3. Copy the Maintenance software (KX-TD7896BaseUnit.exe) from Floppy Disk to your PC and double click the KX-TD7896
Click on the first or last page to see other KX-TDA0155CE service manuals if exist.