DOWNLOAD Panasonic KX-TCA355RU Service Manual ↓ Size: 3.43 MB | Pages: 60 in PDF or view online for FREE

9

To measure the charge-current, R616-619 transfer the current to a voltage.
When the charge-current is 200mA, the voltage is 0.05V.
IC602 amplifies the voltage to 24.5time, then the output voltage is 24.5X0.05=1.225V.
IC601 is DC/DC convertor. This IC adjusts CII to 1.25V.
Then the charge current is adjusted to 204mA.
When charging is completed, the BBIC (IC201) of the portable station set the Q103-Base to "High", then Q102 is turned off. As
a result, the charging current is stopped.

10

• Use only the included charger.
• Use only the included Panasonic AC adaptor (PQLV206CEX).

11

Insert the battery as shown. Close the cover as indicated by the arrow. Close the clasp to secure the cover in place. 

At the time of shipment, the battery is not charged.
Please charge the battery for at least 5.5 hours before initial use.

• When the battery has been completely charged, the charge indicator will change from red to green.
• It is normal for the PS and charger to feel warm while the battery is charging.
• Keep devices sensitive to magnetic fields away from the charger.

After your Panasonic battery is fully charged [at 25

°C]:

• Operating time may be shortened depending on usage conditions and ambient temperature.
• The battery cannot be overcharged.
• The battery will drain even while the unit is turned off.
• The PS can receive calls while charging.

• Battery consumption increases when the PS is used out of range. If "

" flashes, turn off the PS.

• Clean the handset and the charger contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to

grease, dust or high humidity. Otherwise the battery may not charge properly.

• Read "Important Notice Concerning the Correct Use and Charging of Ni-MH Batteries".

The batteries needs to be charged when "

 " flashes, or the alarm sounds every one minute during a conversation.*

* If the low battery warning occurs during a conversation, you can continue the call for a few minutes, after which the call will be
automatically disconnected .

While in use (TALK)

17 hrs approx.

While not in use (Standby)

270 hrs approx.

12

If "

 "flashes after a few telephone calls even when the battery has been fully charged, it is time to replace the battery with a

new one.

1. Turn the power off to prevent memory loss.
2. Release the battery cover latch and lift the cover open.

3. Replace the old battery with a new one, and close the cover.
4. Charge the handset for at least 5.5 hours.

• Please order part number N4HHGMB00007.

If you replace the battery before the low battery warning appears, the battery strength icon may display an incorrect reading. In this
case, use the PS as normal with the new battery installed. When the low battery warning is displayed, charge the battery for at least
5.5 hours. The battery strength icon will then display a correct reading.