Panasonic KX-NS5173XSX / KX-NS5174XSX Service Manual ▷ View online
13
KX-NS5173X/KX-NS5173SX/KX-NS5174X/KX-NS5174SX
7 Installation Instructions
7.1.
Information about the Physical Extension Cards
7.1.1.
MCSLC8 Card (KX-NS5173) and MCSLC16 Card (KX-NS5174)
Function
8-port extension card for SLTs with Caller ID (FSK), Message Waiting Lamp control.
Function
16-port extension card for SLTs with Caller ID (FSK), Message Waiting Lamp control.
Accessory and User-supplied ltems
Accessories (included): Spacer X 3, slot cover X 1
User-supplied (not included): RJ45 connector, Copper wire
User-supplied (not included): RJ45 connector, Copper wire
Pin Assignments
No.
Signal Name
Function
1
TA
Tip port 1
2
RA
Ring port 1
3
TB
Tip port 2
4
TC
Tip port 3
5
RC
Ring port 3
6
RB
Ring port 2
7
TD
Tip port 4
8
RD
Ring port 4
To Extension
RJ45
To Extension
RJ45
8
1
14
KX-NS5173X/KX-NS5173SX/KX-NS5174X/KX-NS5174SX
8 Troubleshooting Guide
The card doesn't work.
Check for short of the
power supply.
(The power supply should be OFF.)
Check for short
circuit of F300 and F301.
SHORT
OPEN
Replace the defective parts.
OK
OK
NG
NG
Check the test
land between [+3.3V]
and [GND].
OK
Resolder the defective parts.
Check the
soldering of terminal of
IC200A-O.
NG
Resolder the defective parts.
Check the
soldering of terminal of
IC300.
NG
Check the
test land between
TP1-16 and GND.
Refer to "5.2.11.
Power Supply Voltage
Generator - VBAT
converter"
Replace the
defective parts.
defective parts.
NG
OK
END
OK
Replace the defective parts.
Check D201A-P.
NG
OK
Check the external DC/DC converter components
for VBAT.
Refer to "5.2.11. Power Supply Voltage Generator
- VBAT converter ".
for VBAT.
Refer to "5.2.11. Power Supply Voltage Generator
- VBAT converter ".
15
KX-NS5173X/KX-NS5173SX/KX-NS5174X/KX-NS5174SX
The bell of SLT does not ring.
END
OK
NG
Check the test land
between TP1-16 and GND.
Refer to "5.2.11. Power Supply Voltage
Generator - VBAT converter".
Check the external DC/DC converter components for VBAT.
Refer to "5.2.11. Power Supply Voltage Generator
- VBAT converter ".
Refer to "5.2.11. Power Supply Voltage Generator
- VBAT converter ".
Replace the
defective parts.
defective parts.
NG
OK
OK
Check D201A-P.
OK
Check soldering of terminal of IC200A-O.
OK
Replace the IC200A-O.
NG
NG
Replace the defective parts.
Resolder the defective parts.
Confirm bell signal(AC 70 to 80V)
between IC200A-O_1pin and 59pin,
IC200A-O_46pin and 48pin.
NG
Check soldering of
terminal of IC200A-O.
terminal of IC200A-O.
NG
Check R206, 208, 207, 209, 200, 201,
D202, 203, C207, 208, 201, 202, 200.
D202, 203, C207, 208, 201, 202, 200.
NG
Replace the defective
parts.
parts.
OK
Replace the IC200A-O.
OK
Resolder the defective parts.
16
KX-NS5173X/KX-NS5173SX/KX-NS5174X/KX-NS5174SX
SLT cannot make a call.
END
OK
NG
Measure the
voltage between T
and R(V_TR) when handset
is ON-HOOK. Is it
about 30V ?
Check the external DC/DC converter components
for VBAT.
Refer to "5.2.11. Power Supply Voltage Generator
- VBAT converter "
NG
OK
OK
Check D201A-P.
OK
Check soldering of terminal
of IC200A-O.
of IC200A-O.
OK
Replace the IC200A-O.
NG
NG
Replace the
defective parts.
defective parts.
Resolder the
defective parts.
defective parts.
NG
Check soldering of terminal of IC200A-O.
NG
Check the test land between .
VBAT (a-x) and GND.
TP1-16 = 28 `32V at ON-HOOK mode.
VBAT (a-x) and GND.
TP1-16 = 28 `32V at ON-HOOK mode.
NG
OK
Check R206, 208, 207, 209, 200, 201,
D202,203, C207,208, 201, 202, 200.
D202,203, C207,208, 201, 202, 200.
NG
Replace the
defective parts.
defective parts.
OK
Check soldering of terminal of IC200A-O
NG
OK
Replace the IC200A-O.
OK
Resolder the defective parts.
Replace the IC200A-O.
OK
Replace the
defective parts.
defective parts.
Resolder the
defective parts.
defective parts.
Measure the
voltage between T
and R(V_TR) when handset
is OFF-HOOK.
Is it about 8V-20 ?
However, V_TR is dependent
on impedance of the
connected SLT.
Click on the first or last page to see other KX-NS5173XSX / KX-NS5174XSX service manuals if exist.