Panasonic KX-HT82480 / KX-HT82470 / KX-HT82460 Service Manual ▷ View online
33
KX-HT82480/82470/82460 Series
SLT cannot make a call.
END
OK
NG
Measure the
voltage between T
and R(V_TR) when handset
is ON-HOOK. Is it
about 30V ?
Check the external DC/DC converter components
for VBAT.
Refer to technical description Power Supply Voltage
Generator - VBAT converter.
NG
OK
OK
Check soldering of terminal
of IC700A/C/E/G.
of IC700A/C/E/G.
OK
Replace the IC700A/C/E/G.
NG
Resolder the
defective parts.
defective parts.
NG
Check soldering of terminal of IC700A/C/E/G.
NG
Check the test land between .
TP CL702A-H and GND
= ** - ** V at ON-HOOK mode.
TP CL702A-H and GND
= ** - ** V at ON-HOOK mode.
NG
OK
Check R700/701/702/703,
D700/701/705/706, C700/701/702.
D700/701/705/706, C700/701/702.
NG
Replace the
defective parts.
defective parts.
OK
Check soldering of terminal of IC700A/C/E/G.
NG
OK
Replace the IC700A/C/E/G.
OK
Resolder the defective parts.
Replace the IC700A/C/E/G.
OK
Replace the
defective parts.
defective parts.
Resolder the
defective parts.
defective parts.
Measure the
voltage between T
and R(V_TR) when handset
is OFF-HOOK.
Is it about 8V-20 ?
However, V_TR is dependent
on impedance of the
connected SLT.
34
KX-HT82480/82470/82460 Series
Go to the flowchart
"SLT cannot make a call".
"SLT cannot make a call".
SLT cannot output DTMF.
END
NG
Is the dialton
heard when the handset is
OFF-HOOK ?
Confirm DTMF signal
between IC700A/C/E/G 38-40pin
IC700A/C/E/G 27-29pin
during sending DTMF.
NG
Check soldering of terminal
of IC700A/C/E/G.
of IC700A/C/E/G.
NG
Resolder the
defective parts.
defective parts.
OK
OK
Replace the IC700A/C/E/G.
OK
Oscillation sound (noise)
is heard while calling.
is heard while calling.
END
NG
Check soldering of terminal
of IC700A/C/E/G.
of IC700A/C/E/G.
OK
Resolder the defective parts.
Replace the IC700A/C/E/G.
OK
35
KX-HT82480/82470/82460 Series
OK
Replace the IC201.
Caller ID is not detected
by optional equipment.
by optional equipment.
Check soldering of terminal of IC201.
Check soldering of
terminal of IC700A/C/E/G.
terminal of IC700A/C/E/G.
all ports
Does this
occur in a specific
ports or all
ports?
NG
Does The bell
of SLT ring ?
specific ports
NG
Resolder the defective parts.
Go to the flowchart
"The bell of SLTdoes not ringl".
"The bell of SLTdoes not ringl".
Resolder the defective parts.
NG
OK
Replace the IC700A/C/E/G.
OK
END
OK
36
KX-HT82480/82470/82460 Series
7.3.
DPH2
7.3.1.
Cannot Call From Doorphone
OK
NG
cable & pin assign check.
Check corrector of Q101A/B.
Door phene connected:High
Connect the cable & pin-press
correctly.
NG
Check Q101A/B, L101A/B, L102A/B,
R234 ,R248,R249, IC201-pin83/84.
Check corrector of Q104A/B.
wait call button:Low
NG
Check Q140A/B,R159A/B, R160A/B,
C140A/B, R234,R246,R247
(RDY[0]/[1])
(HOOK[0]/[1])
OK
Check corrector of Q104A/B.
Press call button:L
H
L
(HOOK[0]/[1])
Check corrector of Q104A/B.
Press call button:L
H
(HOOK[0]/[1])
NG
Check Q104A/B, R159A/B, R160A/B,
C140A/B, R234,R246,R247
NG
check IC100, CN100, JK101 and around parts.
OK
OK
OK
Click on the first or last page to see other KX-HT82480 / KX-HT82470 / KX-HT82460 service manuals if exist.