Panasonic KX-HDV230RU Service Manual ▷ View online
17
KX-HDV230 Series
KX-HDV230C
18
KX-HDV230 Series
ENTER
Used to confirm the selected item.
Main LCD (Liquid Crystal Display)
For details about the main LCD.
Soft Keys
A/B/C (located from left to right) are used to select the item displayed on the bottom line of the display.
For details about the soft keys.
Navigator Key
The Navigator Key includes four direction keys. The direction keys are used to move the cursor to select an item.
If in standby mode, pressing the keys perform the following functions:
LEFT ( )
Used to confirm the selected item.
Main LCD (Liquid Crystal Display)
For details about the main LCD.
Soft Keys
A/B/C (located from left to right) are used to select the item displayed on the bottom line of the display.
For details about the soft keys.
Navigator Key
The Navigator Key includes four direction keys. The direction keys are used to move the cursor to select an item.
If in standby mode, pressing the keys perform the following functions:
LEFT ( )
Used to display the Incoming call log.
*1
RIGHT ( )
Used to open the phonebook.
*1
*1 When the BroadCloud (Presence) feature is enabled, the phone will operate as follows.
Contact your administrator for further information.
LEFT: Used to display Presence.
RIGHT: Used to display Favorites.
LEFT: Used to display Presence.
RIGHT: Used to display Favorites.
/CANCEL
Used to cancel the selected item.
Ringer/Message Waiting/Missed Call Indicator
The lamp flashes when you are receiving a call, or when you have an unread message or missed call notification.
Program Keys [01–12] (Function Keys
Ringer/Message Waiting/Missed Call Indicator
The lamp flashes when you are receiving a call, or when you have an unread message or missed call notification.
Program Keys [01–12] (Function Keys
*1
)
Used to perform the assigned function. When a key is assigned as a Line Status key, it can be used
to confirm the status of the line. The assigned key name can be confirmed on the self-labeling LCD.
For details about changing the program keys.
Handset Hook
Keeps the handset stable when the unit is mounted on a wall.
Headset Jack
Optional headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.)
For up-to-date information about headsets that have been tested with this unit.
to confirm the status of the line. The assigned key name can be confirmed on the self-labeling LCD.
For details about changing the program keys.
Handset Hook
Keeps the handset stable when the unit is mounted on a wall.
Headset Jack
Optional headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.)
For up-to-date information about headsets that have been tested with this unit.
/MESSAGE
Used to access your voice mailbox.
/ /REDIAL
Used to redial the last dialed number.
/HEADSET
Used for performing headset operations.
/MUTE/AUTO ANS
Used to receive an incoming call in hands-free mode or mute the microphone/handset during a conversation.
/VOL
Used to adjust the ringer/receiver volume.
/ /HOLD
During talking, used to place a call on Hold. In standby mode, used to retrieve a call on hold if there is one.
Microphone
Used for hands-free conversation.
Microphone
Used for hands-free conversation.
/SP-PHONE
Used for performing hands-free operations.
/
/TRANSFER
Used to transfer a call to another party.
/CONF
Used to establish a multiple-party conversation.
Page Key
Used to switch the page of program keys displayed on the self-labeling LCD. There are two pages of 12 program keys.
Page Key
Used to switch the page of program keys displayed on the self-labeling LCD. There are two pages of 12 program keys.
19
KX-HDV230 Series
6 Installation Instructions
6.1.
Connections
Connect the Ethernet cable, the Handset Cord and the AC adaptor (Option) to the unit.
*2
*3
*5
*4
*1
*1 DSS cable
Connect the DSS cable as shown in the illustration.
*2 PoE HUB
*3 Optional AC adaptor
*4 Optional EHS headset
*3 Optional AC adaptor
*4 Optional EHS headset
For up-to-date information about EHS headsets that have been tested with this unit.
*5 Optional headset
For up-to-date information about headsets that have been tested with this unit.
The initial setting for the IP address is "DHCP—Auto". For information about your network environment,
contact your administrator.
contact your administrator.
When selecting Ethernet cables (not included)
Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.
*1
*1 60 mm (2 3/8 in) or less
Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.
Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.
When connecting to a switching hub
If PoE is available, an AC adaptor is not needed.
This unit complies with the PoE Class 2 standard.
This unit complies with the PoE Class 2 standard.
When connecting a PC
The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor
Pass the Ethernet cable and the AC adaptor cord under the stand.
20
KX-HDV230 Series
7 Test Mode
7.1.
Peer to Peer Test Mode
This is for VoIP communication TEST.
Setting of Unit are required before communication test by Peer to Peer Mode.
Refer to from 7.1.1 Preparation (P.20) to 7.1.2 Connection for Test (P.21) .
Refer to from 7.1.1 Preparation (P.20) to 7.1.2 Connection for Test (P.21) .
7.1.1.
Preparation
Prepared device:
• Unit (for Test phone and Reference phone): Each one
• Ethernet (LAN) cable
• AC adaptor or PoE Hub
• Ethernet (LAN) cable
• AC adaptor or PoE Hub
Set up unit in test mode by key control
1. Push [2][6][*] and connect power plug (AC adaptor/PoE).
2. Wait until LCD displays [p2p mode]. Then release the three keys.
3. Then the LCD displays [P2P Mode]. Press OK.
4. Then it enters P2P Mode Setting. Choose the any mode.
2. Wait until LCD displays [p2p mode]. Then release the three keys.
3. Then the LCD displays [P2P Mode]. Press OK.
4. Then it enters P2P Mode Setting. Choose the any mode.
Normal /Test1 (192.168.0.241)/Test2 (192.168.0.240)
5. Then the LCD displays [Set OK]. Remove and reconnect the plug.
Ethernet (LAN) cable
Customer's Unit
Reference Unit
Click on the first or last page to see other KX-HDV230RU service manuals if exist.