Panasonic KX-HDV230RU / KX-HDV230RUB Service Manual / Supplement ▷ View online
41
KX-HDV230 Series
10 Disassembly and Assembly Instructions
10.1. Remove Main Board and Selflabel Board
1. Remove 7 Screws (A) and remove the Lower Cabinet.
2. Remove 5 Screws (A), 2 FFC Cable and remove the Main Board.
3. Remove Screw (A) and remove the Selflabel Board.
3. Remove Screw (A) and remove the Selflabel Board.
Lower Cabinet
Upper Cabinet
(A)
(A)
(A)
(A)
(A)
(A)
(A)
Upper Cabinet
Main Board
(A)
(A)
(A)
(A)
(A)
(A)
Selflabel Board
FFC Cable
42
KX-HDV230 Series
10.2. Assembly for Lead wire
Perform this process in reverse when taking the unit apart.
10.2.1.
Connecting Lead Wires
Purple
Gray
Solder
Purple
Gray
Solder
Fully insert the FFC
into the connector
until the edge of the
reinforcing plate is
aligned with the edge
of the Main Board.
into the connector
until the edge of the
reinforcing plate is
aligned with the edge
of the Main Board.
Blue
Orange
Solder
Orange
Solder
Solder
Blue
Solder
Blue
Orange
Solder
Blue
Olange
Gray
Purple
Gray
Purple
Solder
Solder
Blue
Gray
Solder
Purple
Gray
Yellow
Black
Black
Red
Red
Brown
Yellow
Brown
LCD PCB
LED PCB
Silk line.
BACK LIGHT PCB
Cable is to be inserted into connector
<NG>
<OK>
Note:
2.0mmMAX
LEAD WIRE
SOLDER
43
KX-HDV230 Series
Clamp
Headset Jack
Handset Jack
Put two Lead Wires in
each Rubber Slit.
each Rubber Slit.
Clamp LEAD WIRE to each slot
- WIRE from LCD
(Grey & Purple)
- WIRE from LCD
(Grey & Purple)
Clamp LEAD WIRE to each slot
- WIRE from PCB
(Blue & Orange) (Gray & Purple)
- WIRE from PCB
(Blue & Orange) (Gray & Purple)
Clamp LEAD WIRE
to each slot
- WIRE from DC JACK
(Grey & Purple)
to each slot
- WIRE from DC JACK
(Grey & Purple)
Clamp LEAD WIRE to each slot as follows.
- No 1 : WIRE from Headset Jack(Black & Brown)
- No 2 : WIRE from Headset Jack (Red & Yellow)
Clamp LEAD WIRE to each slot as follows
-No 3 : WIRE from Handset Jack (Black & Brown)
-No 4 : WIRE from Handset Jack (Red & Yellow)
- No 1 : WIRE from Headset Jack(Black & Brown)
- No 2 : WIRE from Headset Jack (Red & Yellow)
Clamp LEAD WIRE to each slot as follows
-No 3 : WIRE from Handset Jack (Black & Brown)
-No 4 : WIRE from Handset Jack (Red & Yellow)
1
2
3
Clamp LEAD WIRE to each slot as follows.
- Wire from speaker (Blue & Orange)
- Wire from speaker (Blue & Orange)
Clamp
4
44
KX-HDV230 Series
11 Maintenance
11.1. Terminal Guide of the ICs Transistors and Diodes
11.1.1.
Main Board
11.1.2.
LED Board
C2HBBY000157
C1CB00004732
C1CB00004330
C0DBAYY01648
C0EBE0000436
C3ABTY000111
C1CB00004391
B0ZBZ0000156
B0JCDD000001,B0JCPL000004
DB2X41400L
DZ2J068M0L
B3AFB0000370
B1CFRM000042
B1ADCN000007,B1ABGE000014
B1ABDF000026,B1GDCFGJ0008
B1ADCF000020,B1GBCFGN0022
B1ABDF000026,B1GDCFGJ0008
B1ADCF000020,B1GBCFGN0022
Change
Cathode
A1
W1
W19
A19
A27
A40
A1
A14
1
4
8
5
1
2
4
3
1
8
16
9
A9
A1
T9
T1
Cathode
Anode
B3AEB0000146
Cathode
Anode
Anode
Cathode
Click on the first or last page to see other KX-HDV230RU / KX-HDV230RUB service manuals if exist.