Panasonic UB-T781 / UB-T781W / UB-T761 Service Manual ▷ View online
49
UB-T781/T781W/T761
6.4.1.5.
AC Inlet
Before performing the following steps, remove the following parts.
• Front Lower Frame Cover, Control-Power Cover-Front and Hub PCB Shield Plate (refer to the section 6.2 “Power, Hub and Con-
trol Boards”).
• Side Cover L (refer to the section 6.4.1.1 “Side Cover L, Upper Frame Cover and Side Cover R”).
1. Remove the screw (A) and ground harness.
2. Disconnect the inlet harness.
3. Release the ground harness and inlet harness from the clamper.
4. Remove the 2 screws (B) and AC switch unit.
2. Disconnect the inlet harness.
3. Release the ground harness and inlet harness from the clamper.
4. Remove the 2 screws (B) and AC switch unit.
5. Remove the 3 screws (C) and control-power cover-back.
6. Remove the 3 screws (D) and AC inlet assembly.
6. Remove the 3 screws (D) and AC inlet assembly.
50
UB-T781/T781W/T761
6.4.2.
When mounting using a stand (sold separately)
6.4.2.1.
Side Cover L, Upper Frame Cover and Side Cover R
(Side Cover L)
(Upper Frame Cover)
(Side Cover R)
1. Remove the 2 screws (A).
2. Remove the side cover L while turning the side cover L in the direction of the arrow (1).
2. Remove the side cover L while turning the side cover L in the direction of the arrow (1).
1. Remove the 2 screws (B).
2. Remove the upper frame cover while turning the upper frame cover in the direction of the arrow (2).
2. Remove the upper frame cover while turning the upper frame cover in the direction of the arrow (2).
1. Remove the 2 screws (C).
2. Remove the side cover R while turning the side cover R in the direction of the arrow (3).
2. Remove the side cover R while turning the side cover R in the direction of the arrow (3).
51
UB-T781/T781W/T761
6.4.2.2.
Right Upper Corner Covers
Before performing the following steps, remove the upper frame cover and side cover R (refer to the section 6.4.2.1 “Side Cover L,
Upper Frame Cover and Side Cover R”).
Upper Frame Cover and Side Cover R”).
6.4.2.3.
Sensor Covers
Before performing the following steps, remove the upper frame cover and side cover L (refer to the section 6.4.2.1 “Side Cover L,
Upper Frame Cover and Side Cover R”).
Upper Frame Cover and Side Cover R”).
1. Remove the 3 screws (D).
2. Remove the right upper corner cover-front.
3. Remove the 2 screws (E).
4. Remove the right upper corner cover-rear.
2. Remove the right upper corner cover-front.
3. Remove the 2 screws (E).
4. Remove the right upper corner cover-rear.
1. Remove the 2 screws (F).
2. Remove the sensor cover-front.
3. Remove the 3 screws (G).
4. Remove the sensor cover-back.
2. Remove the sensor cover-front.
3. Remove the 3 screws (G).
4. Remove the sensor cover-back.
52
UB-T781/T781W/T761
6.4.2.4.
Pen Tray Covers
Before performing the following steps, remove the front lower frame cover (refer to the section 6.1 “Speaker and Audio Board”), Vol-
ume Cover (rerer to the section 6.1.1 “Audio Board”) and side cover R (refer to the section 6.4.2.1 “Side Cover L, Upper Frame
Cover and Side Cover R”).
ume Cover (rerer to the section 6.1.1 “Audio Board”) and side cover R (refer to the section 6.4.2.1 “Side Cover L, Upper Frame
Cover and Side Cover R”).
1. Remove the 2 screws.
2. Remove the 2 board attachement covers.
2. Remove the 2 board attachement covers.
3. Release the cables from the 2 clampers.
4. Remove the 2 screws and back lower frame cover.
4. Remove the 2 screws and back lower frame cover.
Click on the first or last page to see other UB-T781 / UB-T781W / UB-T761 service manuals if exist.