Panasonic UB-5335 / UB-5835 (serv.man2) Service Manual ▷ View online
53
8.1.2.
Printer Block
54
8.2.
Screen Block
8.2.1.
Tray
8.2.2.
Cover Upper
(1) Remove the 2 screws (a) and screw (b).
(This procedure is applied to UB-5335 only.)
(This procedure is applied to UB-5335 only.)
(2) Remove the 2 screws (a) and 2 screws (b).
(This procedure is applied to UB-5835 only.)
(This procedure is applied to UB-5835 only.)
(3) Remove the Tray in the direction of the arrows (2), while
pushing the Corner Cover LL in the direction of the arrow (1).
pushing the Corner Cover LL in the direction of the arrow (1).
(1) Remove the screw (e). Then, remove the Cover Upper in the
direction of the arrow.
direction of the arrow.
55
8.2.3.
Screen Unit
(1) Remove the Tray. (See 8.2.1.)
(2) Remove the Cover Upper. (See 8.2.2.)
(3) Remove the 2 connectors from the Printer Unit. (See 8.3-(4).),
or remove the Printer Unit. (See 8.3.)
or remove the Printer Unit. (See 8.3.)
(4) After inserting the lower part of the Folding Support (Front) into
the slit of the Hinge shown on the figure, secure the upper of
the Folding Support (Front) with the screw.
the Folding Support (Front) with the screw.
Note:
As the service parts, Folding Support (Front) and its screw will
be supplied.
be supplied.
(5) Remove the 6 screws (h) with spacers and washers.
Then remove the 2 screws (c).
Then remove the 2 screws (c).
56
(6) Release the hook of the Screen Unit’s right panel from the
Board Attachment (Upper), and then fold the center and right
panels back to back, securing the panels by engaging the
hooks.
Board Attachment (Upper), and then fold the center and right
panels back to back, securing the panels by engaging the
hooks.
(7) Fold the above folded panels (center and right) and the left
panel face to face in the direction of the arrow.
panel face to face in the direction of the arrow.
Click on the first or last page to see other UB-5335 / UB-5835 (serv.man2) service manuals if exist.