Panasonic KV-S7065C (serv.man4) Service Manual ▷ View online
8.3.17. Conveyor 1
(1) Push the ADF Door Release to open the ADF Door.
(2) Remove the 2 screws (a) and 2 screws (b) with the spacers.
(Left side View)
(3) Remove the Conveyor 1 in the direction of the arrow from
the scanner.
(Top Back View)
73
KV-S7065CSERIES
8.3.18. Drive Belts 1, 2, 3
(1) Remove the ADF Cover (B). (See 8.3.14.)
(2) Remove the Drive Belts 1, 2.
(Back View)
(3) Loosen the 2 screws. And push down the lever until it goes,
and tighten the screws.
(4) Remove the Drive Belt 3.
Reassembling Note: BELT LAYOUT
a. Reattach the Drive Belt 3 as shown on the
following figure.
b. Loosen the 2 screws.
(Loosening the 2 screws will make the belt
tension properly.)
tension properly.)
c.
Tighten the 2 screws.
74
KV-S7065CSERIES
8.3.19. Drive Rollers 1, 2, 3
(1) Remove the Drive Belt 1, 2, 3. (See 8.3.18.)
(2) Remove the Conveyor 1. (See 8.3.17.)
(3) Pull out the Drive Rollers 1, 2, 3 in the direction of the
arrows, holding them.
75
KV-S7065CSERIES
8.3.20. Double Feed Detector (G)
(1) Remove the Drive Rollers 1, 2, 3. (See 8.3.19.)
(2) Remove the 2 screws through the holes.
Reassembling Note:
Be careful not to crimp or pinch the wires when
tightening the screws.
tightening the screws.
(Left side View)
(3) Disconnect the 1 connector (CN5021).
(Left Side View)
(4) Release the stoppers of detector base to remove the
Double Feed Detector (G).
76
KV-S7065CSERIES
Click on the first or last page to see other KV-S7065C (serv.man4) service manuals if exist.