Panasonic KV-S7065C (serv.man4) Service Manual ▷ View online
8.2.16. Carriage Motor
(1) Remove the Shield Plate A. (See 8.2.13.)
(2) Remove the Shield Plate B. (See 8.2.13.)
(3) Remove the 4 screws and 1 connector (CN4010) on the
DRIVE Board to release the Carriage Motor with the plate
from the scanner.
from the scanner.
(Top View)
(4) Remove the 2 screws to separate the motor from the plate
and belt.
Reassembling Note:
a. Loosen the 3 screws and pull the Carriage Belt
Support Plate in the direction of the arrow so as
to reattach the Carriage Belt easily.
And tighten the 3 screws.
to reattach the Carriage Belt easily.
And tighten the 3 screws.
b. Reattach the Carriage Motor and belt to the
original position in the reverse order of the
disassembling.
disassembling.
c.
Loosen the 3 screws again, which makes the belt
tension increased, naturally.
tension increased, naturally.
d. Tighten the 3 screws in order of [1], [2], and [3].
53
KV-S7065CSERIES
8.2.17. Power Box & Cover
(1) Remove the Shield Plates (A, B). (See 8.2.13.)
(2) Remove the 2 screws (a), 2 screws (b), and 2 connectors
(CN4003, Power Switch Relay Connector) and pull out the
Power Box in the direction of the arrow.
Power Box in the direction of the arrow.
Note:
* When pulling out Power Box, be sure not to
damage the Power Switch Relay Connector in the
Power Box.
damage the Power Switch Relay Connector in the
Power Box.
(3) Remove the 5 screws to release the Cover from the box.
54
KV-S7065CSERIES
8.2.18. FAN
(1) Remove the Power Box & Cover. (See 8.2.17.)
(2) Remove the 1 connector to the POWER Board and 2
screws to release the FAN from the board.
8.2.19. POWER Board
(1) Remove the Power Box & Cover. (See 8.2.17.)
(2) Remove the 7 screws (a), 3 screws (b), and all connectors
on the POWER Board.
55
KV-S7065CSERIES
8.2.20. Inverter Cover
(1) Remove the Flatbed Glass. (See 8.2.11.)
(2) Slide the CIS Carriage to the right.
(3) Remove the 3 screws to release the Inverter Cover from the
carriage.
(4) Lift the Inverter Cover in the direction of the arrow (1), and
slide it in the direction of the arrow (2) to remove it.
8.2.21. CIS (F)
(1) Remove the Inverter Cover. (See 8.2.20.)
(2) Remove the 4 screws and 2 connectors to release the CIS
(F) from the CIS Carriage.
8.2.22. CARRIAGE RELAY Board
(1) Remove the CIS (F). (See 8.2.21.)
(2) Remove the 3 connectors (CN3000, CN3001, CN3002) and
3 screws to release the CARRIAGE RELAY Board from the
CIS carriage.
CIS carriage.
56
KV-S7065CSERIES
Click on the first or last page to see other KV-S7065C (serv.man4) service manuals if exist.