Panasonic KV-S3105C / KV-S3085 (serv.man2) Service Manual / Supplement ▷ View online
5
3 “SECTION 4 INSTALLATION
3.1.
“Section 4.7 System Requirements”
When using the scanner, the required personal computer conditions are as follows.
Note 1:
1. This system requires 1 GB free space of HDD in the personal computer at least.
2. A color scanning beyond the conditions of A3 Size and 600 dpi may not be executed, based on Windows
®
98 or
Windows
®
Me.
And even based on another OS, a high resolution scanning may not be done.
3. The scanning speed differs depending on the personal computer’s operating environment or application.
4. Be sure to connect the scanner directly to the USB interface port on PC.
We cannot guarantee that the scanner will work properly if it is connected to a USB hub.
5. A daisy-chain connection to the SCSI interface may not allow the scanner to realize the high speed scanning
6. When using Windows NT
5. A daisy-chain connection to the SCSI interface may not allow the scanner to realize the high speed scanning
6. When using Windows NT
®
, be sure to install the ASPI layer software that the SCSI Board’s vender provides.
Note 2
• Windows
®
98 is Microsoft
®
Windows
®
98 operating system.
• Windows
®
Me is Microsoft
®
Windows
®
Me operating system.
• Windows NT
®
is Microsoft
®
Windows NT
®
operating system.
• Windows
®
2000 is Microsoft
®
Windows
®
2000 operating system.
• Windows
®
XP is Microsoft
®
Windows
®
XP operating system.
• Microsoft
®
, Windows
®
and Windows NT
®
are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
• Pentium
®
is a registered trademark of Intel Corporation.
• Each company’s name or company product name is each company’s trademark or registered trademark.
SCSI Connection
USB Connection
CPU
Minimum: Pentium
, 1 GHz
Recommended: Pentium4, 2 GHz or higher
Memory
Minimum: 256MB
Recommended: 512MB or more
Recommended: 512MB or more
OS
Windows® 98
Windows NT® 4.0
Windows® 2000
Windows® Me
Windows® XP
Windows NT® 4.0
Windows® 2000
Windows® Me
Windows® XP
Windows® 98 SE
Windows® 2000 SP4
Windows® Me
Windows® 2000 SP4
Windows® Me
Windows® XP SP2
Display
Resolution
1,024x768 dots or more
Colors
65,536 colors or more
Interface
SCSI
Recommended SCSI board: Adaptec
SCSI Board (29160 / 39160)
Recommended SCSI board: Adaptec
SCSI Board (29160 / 39160)
USB 2.0
6
4 “SECTION 9 OPERATION”
4.1.
“Section 9.4 Setting List”
4.1.1.
“Section 9.4.4 Other Setting Mode (Normal Mode 4)”
Remarks
(1): Parameter setting by user
(2): Status Indication
(3): Parameter setting by service-man
(4): Adjustment
(5): Diag.
(1): Parameter setting by user
(2): Status Indication
(3): Parameter setting by service-man
(4): Adjustment
(5): Diag.
Note
*1
: This information on LCD includes amount value for additional memory. This version information will not be
displayed when INTERFACE Board is not installed.
*2
: This version information will not be displayed when Post-Imprinter is not installed.
*3
: In case that Wide SCSI setting is “Enable”: SCSI ID Range 0 to 15, Transfer Rate: Wide 40 MB/s or Wide 20 MB/s.
Setting the SCSI ID, Wide SCSI, and Transfer Rate will be activated after restarting the power.
*4
: Setting the Product ID will be activated after restarting the power.
*5
: This content “KV-SS905C” will be selectable only in case the optional “Color upgrade kit” has been installed in
scanner KV-S3085 Series.
*6
: “Disable” setting is not available if the scanner has CONTROL Board whose
revision number is 2 or later.
No.
Item
Setting Contents
Default Factory
Default
Remarks
1-a Firmware version
(CONTROL)
-
-
(2)
1-b Firmware version
*1
(INTERFACE)
-
-
(2)
1-c Firmware version
*2
(Post-Imprinter)
-
-
(2)
2
Buzzer
OFF
ON
ON
ON
(1)
3
SCSI ID
*3
0-15
or
0-7
6
6
(1)
4
Wide SCSI
*3
Disable Enable
Enable Enable
(1)
5
Transfer Rate
Wide
40 MB/s
or
20 MB/s
Wide
20 MB/s
or
10 MB/s
Wide
40 MB/s
Wide
40 MB/s
(1)
6-a Clean Roller Warning
(Disp %)
%
0 %
0 %
(2)
6-b Clean Roller
(Clear warning for
“Clean Roller”)
“Clean Roller”)
Clear
-
-
-
7-a Replace Roller
Warning (Disp %)
%
0 %
0 %
(2)
7-b Replace Roller
(Clear warning for
“Replace Roller”)
“Replace Roller”)
Clear
-
-
-
8-a Product ID (for
KV-S3105C Series)
*4
KV-
S3105C
KV-
SS905C
KV-
SS855
KV-
S3105C
KV-
S3105C
-
8-b Product ID (for
KV-S3085 Series)
*4
KV-
S3085
*5
KV-
SS905C
KV-
SS855
KV-
S3085
KV-
S3085
-
9
Sleep Mode
(Set period to enter in
Sleep Mode)
(Set period to enter in
Sleep Mode)
*6
Disable
1-60
min
15 min 15 min
(1)
7
4.2.
“Section 9.5 Setting Operation (Normal Mode)”
4.2.1.
“Section 9.5.4 Other Setting Mode (Normal Mode 4)”
4.2.1.1.
“Section 9.5.4.1 Mode-1”
Note:
*1
This content “KV-SS905C” will be selectable only in case the optional “Color upgrade kit” has been installed
in scanner KV-S3085 Series.
*2
“Disable” setting is not available if the scanner has CONTROL Board whose
revision number is 2 or later.
8
4.3.
“Section 9.7 Service Utility”
4.3.1.
“Section 9.7.1 Main menu indication for Service Utility”
This section describes the functions of the service utility software, such as USB setting and other that are not included in LCD
operation. (Service mode only)
Executing “Service Utility.exe” (without installing the software to the PC except for ASPI Manager) will allow you to operate all the
functions found in this service utility software.
operation. (Service mode only)
Executing “Service Utility.exe” (without installing the software to the PC except for ASPI Manager) will allow you to operate all the
functions found in this service utility software.
(On the other hand, make sure to install the device driver from the CD-ROM enclosed in the
scanner.)
scanner.)
Note:
• This utility software is not included with the scanner.
Please call service or technical support to find out how to obtain the service utility
software.
• This software should be used only by an authorized service technician.
Improper use of this software may cause damage to the scanner.
* Fig. 9.7.1 Main Menu
*Note:
• This is a main menu sample (Fig. 9.7.1) of the Service Utility software (Version
4.2
).
• This software is the latest version at the time when this service manual is issued, but it is subject to change without
notice.
Click on the first or last page to see other KV-S3105C / KV-S3085 (serv.man2) service manuals if exist.