DOWNLOAD Panasonic KV-S1057C / KV-S1027C / KV-SL1066 / KV-SL1056 / KV-SL1055 / KV-SL1036 / KV-SL1035 Service Manual ↓ Size: 14.28 MB | Pages: 127 in PDF or view online for FREE

4

1. Before servicing, unplug the power cord to prevent electrical shock hazard.
2. When replacing parts, use only manufacture’s recommended components for safety.
3. Check the condition of power cord. Replace if wear or damage is evident.
4. After servicing, be sure to restore the wire dressing, insulation barriers, insulation papers, shields, etc.

Repair service shall be provided in accordance with repair technology information such as service manual
so as to prevent fires, injury or electric shock, which can be caused by improper repair work.

1. When performing repairs, neither the products nor its parts or components shall be modified.
2. If cable assembly is supplied as the smallest unit when servicing, make sure to replace

the cable assembly.

ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help to prevent recurring malfunctions.

1. Cover the plastic parts with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not grasp IC or LSI pins with bare fingers.

• In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con-

tains lead.

• We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn), Silver 

(Ag), and Copper (Cu).

• This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair 

work we suggest using the same type of solder.

• PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.

• PbF solder has a melting point that is 50 

 - 70 F, (30  - 40 C) higher than Pb solder. 

Please use a soldering iron with temperature control and adjust it to 700 

 ± 20 F (370  ± 10 C).

• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100 

F (600 C). 

• When applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto

the opposite side (See figure below)

5

We recommend you to use the following solder when re-soldering components for repair. Before using other Pb free solder than the
following solder, make sure to confirm that the solder maker (you use) has the license agreement for Pb free solder.

Supplier: Senju Metal Industry Co., Ltd. (http://www.senju-m.co.jp)
Part Description in Senju: EcoSolder RMA02 P3 M705 Series

This product is fully compliant with the national laws transposed from the EU Directive on the restriction of the use of certain
hazardous substances (RoHS) in electrical and electronic equipment, effective 1st July 2006 in the EU countries.

In order for the product to comply with the RoHS Directive, the six particular substances (lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been changed to RoHS-compliant parts where
applicable.
Due to spare parts application of RoHS legislation, non-compliant spare parts cannot be used to repair compliant products put on
the EU market on or after 1st July 2006. Please therefore make sure to order and use RoHS-compliant spare parts listed in this
manual.

6

Scanning face

Duplex

Scanning method

Color CIS (600 dpi)

Background : Black 

＆ White

Scanning size

216 mm (8.5 in.)

Scanning
speed

*1

A4 / Letter
Simplex
Binary / color
(200 dpi, 300 dpi)

65
pages/min.

45
pages/min.

40
pages/min.

35
pages/min.

30
pages/min.

A4 / Letter
Duplex
Binary / color
(200 dpi, 300 dpi)

130
images/min.

90
images/min.

80
images/min.

70
images/min.

60
images/min.

Scanning resolution

100 – 600 dpi (1 dpi step)
1,200 dpi (Interpolated)
Optical: 300 dpi / 600 dpi (Automatic switch)

Paper

*2

Width

48 – 216 mm (1.9 – 8.5 in.)

Length

*3

When feeding one sheet: 54 mm – unlimited (2.1 in. – unlimited)
When feeding multiple sheets: 54 – 356 mm (2.1 – 14 in.)

Thickness

0.04 – 0.5 mm (1.6 – 19.7 mils)
Note: 1 mil = 0.001 in.

Weight

20 – 413 g/m² (5 – 110 lb.)

Feed capacity

The height of all the documents on the tray should be less than 10 mm (0.4 in.).
130 sheets (64 g/m² [17 lb.] High-quality woodfree paper)
100 sheets (75 g/m² [20 lb.] High-quality woodfree paper)
100 sheets (80 g/m² [21 lb.] High-quality woodfree paper)

Card

*4

Format

ISO format

Size

85.6 x  54 mm (3.4 x  2.1 in.)

Thickness

0.76 mm (0.03 in.)

Feed capacity

3 cards on the feed tray or on the mixed batch card guide

*5

 sheets

Roller replacement

250,000

Tonal Gradation

Binary, Grayscale, Color, MultiStreamTM (Binary and Color, Binary and Grayscale,
MultiStream is a trademark of EMC Corporation)

•

dpi: dots per inch

*1

The scanning speed differs depending on the host computer, the operating system, the application, the measuring method, the quantity of data in
the image, and the paper type. The scanning speed depends on a measuring method of Panasonic.

*2

For details, see "Compatible Paper Types".

*3

Using "Long Paper", you can scan long documents by splitting them into smaller parts. For details about "Long Paper", refer to the Image Capture
Plus, TWAIN, or ISIS help.

*4

For details, see "Compatible Card Types".

*5

For details, see "Replacing the Rollers".

"Weight in pounds" of paper represents the weight of 500 (432 x  559 mm [17 x  22 in.]) sheets.

Image Control

Auto preview, Auto rescan, Automatic Brightness Adjustment,Multi Color Drop Out, 
Dynamic Threshold, White Level From Paper,Image Emphasis, Gamma, Automatic 
Separation, Noise Reduction

Compression

MH, MMR, JPEG (Color, Grayscale)

(See 4.7. Setting Documents and/or Card (P.15).) 

(See 15. Appendix (Operating Manual P.60).) 

(See 15. Appendix (Operating Manual P.23).) 

7