Panasonic KV-S1057C / KV-S1027C / KV-SL1066 / KV-SL1056 / KV-SL1055 / KV-SL1036 / KV-SL1035 Service Manual ▷ View online
9
3 Location of Controls and Components
3.1.
Main Unit
10
11
3.2.
Operation Panel and LED Indicators
KV-S1057C and KV-S1027C
1
2
3
4
5
6
7
8
KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 and KV-SL1035
1
2
3
5
4
6
9
LED (
Red
)
Lights when an error occurs.
LED (
Green
)
Shows the scanner’s status.
Power button
Press the power button for more than one second to turn the unit off.
Press the power button for more than one second to turn the unit off.
Cursor button
Skip button
If you press this button after a double feed is detected and scanning has been paused, the document
(or documents) detected as a double feed will be scanned, and then ejected from the scanner.
Scanning will continue after the document is scanned and ejected.
If you press this button after a double feed is detected and scanning has been paused, the document
(or documents) detected as a double feed will be scanned, and then ejected from the scanner.
Scanning will continue after the document is scanned and ejected.
1
2
3
4
5
Start/Stop button
•
If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button
starts scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus,
TWAIN, or ISIS help.
starts scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus,
TWAIN, or ISIS help.
•
During scanning, pushing this button stops scanning.
•
If you press this button after a double feed is detected and scanning has been paused, the
document (or documents) detected as a double feed will be ejected from the scanner without
being scanned. Scanning will stop.
document (or documents) detected as a double feed will be ejected from the scanner without
being scanned. Scanning will stop.
6
12
3.3.
About LED
The status of the scanner is displayed by the LED (Red) (
) and the LED (Green) (
), as shown in the
table below:
LED (
Red
)
LED (
Green
)
Status
OFF
OFF
Power OFF
*1
OFF
ON
Ready mode or Scanning
OFF
Blinking (Slow, Long ON)
Sleep mode
*2
Blinking (Slow)
ON
Warning
ON
OFF
Error
*3
OFF
Blinking (Fast)
Warming up
OFF
Blinking (Fast, 2 times consecutively)
Double Feed Skip mode
*1
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will be
turned off automatically. Press the power button of the scanner to turn it on. You can enable/disable the power off feature, and change
the time until the scanner turns off in User Utility.
turned off automatically. Press the power button of the scanner to turn it on. You can enable/disable the power off feature, and change
the time until the scanner turns off in User Utility.
*2
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press any
button (except the power button) on the scanner’s operation panel to return to ready mode. The time until the scanner enters sleep
mode can be changed in User Utility.
button (except the power button) on the scanner’s operation panel to return to ready mode. The time until the scanner enters sleep
mode can be changed in User Utility.
*3
For details about the error, refer to "Error Messages (KV-S1057C and KV-S1027C only)" or check in User Utility.
1
2
1
2
Click on the first or last page to see other KV-S1057C / KV-S1027C / KV-SL1066 / KV-SL1056 / KV-SL1055 / KV-SL1036 / KV-SL1035 service manuals if exist.