Panasonic EP-MA73 / EP-MA73KU892 Service Manual ▷ View online
37
6.3.
Checking the Sensors
Procedures
1. Push the Off/On button on the Controller.
2. Check following Connectors (pin No.) and check whether there is the output voltage of HIGH-LOW (DS5V - 0V) when moving
2. Check following Connectors (pin No.) and check whether there is the output voltage of HIGH-LOW (DS5V - 0V) when moving
each Sensor boards.
38
6.4.
Wiring diagram of Main PCB and Sub PCB
The following values are in the standby conditions with the Off/On switch on the Controller pushed.
Values with are when each operations are executed.
(Output voltages are approximate.)
Remove Connectors to check the resistance of the parts.
Values with are when each operations are executed.
(Output voltages are approximate.)
Remove Connectors to check the resistance of the parts.
39
7 Service Fixture & Tools
40
8 AIR
8.1.
Air tube allocation (Main body)
Click on the first or last page to see other EP-MA73 / EP-MA73KU892 service manuals if exist.