Panasonic PV-GS90P / PV-GS90PC / PV-GS90PL / NV-GS90EG / NV-GS90E / NV-GS90EB / NV-GS90EP / NV-GS90EE / NV-GS90EF / NV-GS90EK / NV-GS90GC / NV-GS90GCS / NV-GS90GN / NV-GS98GK Service Manual ▷ View online
9.2.2. Checking and repairing individual circuit boards except module parts (Main
P.C.B.)
How to use extension cables.
29
PV-GS90P
9.3. Location for Connectors of the Main P.C.B.
30
PV-GS90P
9.4. Electrical Adjustment Procedures
9.4.1. Initial guideline
The table below shows which adjustments are necessary according to the unit parts and individual parts to be replaced.
Make sure to perform these adjustments shown below as necessary.
Make sure to perform these adjustments shown below as necessary.
9.4.2. Set-up manual for Digital Video Camcorder or Digital Video Camera.
1. Installation of USB-SERIAL Driver
Execute the “Setup.exe” file in “Com Mass” folder by double clicking to install the USB-SERIAL driver.
2. Set-Up
a. Remove the tape from this unit.
b. To enter the PC connection (COM) mode, push the [PHOTO SHOT] button, [RECORDING START/STOP] button and
b. To enter the PC connection (COM) mode, push the [PHOTO SHOT] button, [RECORDING START/STOP] button and
[MANUAL AF/MF] simultaneously for 3 seconds without connecting the USB Cable.
31
PV-GS90P
c. Connect the PC and Digital Video Comcorder or Digital Video Camera as shown in Fig. E1 and E2.
Fig. E1
32
PV-GS90P
Click on the first or last page to see other PV-GS90P / PV-GS90PC / PV-GS90PL / NV-GS90EG / NV-GS90E / NV-GS90EB / NV-GS90EP / NV-GS90EE / NV-GS90EF / NV-GS90EK / NV-GS90GC / NV-GS90GCS / NV-GS90GN / NV-GS98GK service manuals if exist.