Panasonic NV-GS250E / NV-GS250EG / NV-GS250EB / NV-GS250GC / NV-GS250GN / NV-GS250GCD / NV-GS258GK Service Manual ▷ View online
7 ELECTRICAL ADJUSTMENT PROCEDURES
7.1. COMPUTER ASSISTED ADJUSTMENT SYSTEM <TATSUJIN>
ADJUSTMENT.
This unit employs the computer assisted system named; “TATSUJIN PC-Adjustment” for Electrical adjustment.
7.2. SET-UP MANUAL FOR DV-Camcorder.
1. SAVE THE SOFTWARE
Install the effective model’s TATSUJIN Software to PC: Personal Computer.
2. SET-UP (CONNECTION)
a. Remove the EVR cover of the DV Camcorder.
Unlock the locking tab and remove the EVR cover as shown in Fig. E1.
b. Make a connection.
Connect the PC, the PC/IF Unit and the DV Camcorder as shown in Fig.E2 and E3.
c.
Check the SW position on Measuning Board.
The position of SW on Measuning Board checks as shown in Fig. E4.
Fig. E1
Fig. E2 Necessary Equipment & Tools for Connection.
29
NV-GS250E / NV-GS250EG / NV-GS250EB / NV-GS250GC / NV-GS250GN / NV-GS250GCD / NV-GS258GK
Fig. E3 Rough image of set-up connection
30
NV-GS250E / NV-GS250EG / NV-GS250EB / NV-GS250GC / NV-GS250GN / NV-GS250GCD / NV-GS258GK
Fig. E4
(Extension cables (VFK1317 × 2pcs) ----- Measuring Board (VFK1308E) ----- 232C I/F Cable (VFK1395))
31
NV-GS250E / NV-GS250EG / NV-GS250EB / NV-GS250GC / NV-GS250GN / NV-GS250GCD / NV-GS258GK
1. Turn on the PC and install the TATSUJIN Adjustment
Program into the PC.
2. TATSUJIN PC-Adjustment Program start in the following
procedure.
PC Menu : [Start]
→
[Program]
→
[win Tatsujin]
→
[DV
Movie]
→
[NV-GS250 Series]
Fig. E5-1
The main menu display will be displayed.
3. Select the desired model.
4. Turn on the camcorder. Then, click “Start.”
Fig. E5-2
5. The communication is complete, and the dialog will appear.
Then, click “VCR (V) or Cam (C)” to save the EEPROM
data,
data,
Fig. E5-3
6. Saving for EEPROM data is complete, menu will appear.
To perform each adjustment, display the adjustment menu
by selecting the desired menu from “Camera Adjust,”
“Video Adjust,” “LCD Adjust” or “EVF Adjust” and select
each adjustment item.
by selecting the desired menu from “Camera Adjust,”
“Video Adjust,” “LCD Adjust” or “EVF Adjust” and select
each adjustment item.
Fig. E5-4
Note:
The adjustment data is stored to the EEPROM IC after
each adjustment.
each adjustment.
7. After adjustment, to end the software, select “Exit” in File
menu or close the window.
Fig. E5-5
7.3. SET UP PC-EVR ADJUSTMENT PROGRAM
32
NV-GS250E / NV-GS250EG / NV-GS250EB / NV-GS250GC / NV-GS250GN / NV-GS250GCD / NV-GS258GK
Click on the first or last page to see other NV-GS250E / NV-GS250EG / NV-GS250EB / NV-GS250GC / NV-GS250GN / NV-GS250GCD / NV-GS258GK service manuals if exist.