Panasonic NV-DS60EG / NV-DS60EGE / NV-DS60EGM / NV-DS60B / NV-DS60EN / NV-DS60ENT / NV-DS60ENC / NV-DS60A / NV-DS65EG / NV-DS65EGE / NV-DS65EGM / NV-DS65B / NV-DS65EN / NV-DS65ENT / NV-DS65ENC / NV-DS65A (serv.man2) Service Manual ▷ View online
Fig. 1
5
NV-DS60EG NV-DS60EGE
3.1.2. REPLACEMENT PROCEDURES FOR CSP (CHIP SIZE PACKAGE) IC
3.1.2.1. EQUIPMENT
1. Pre-Heater
2. Spot Heater
3. Vacuum Pick-up
4. P.C.B. Holder
Fig. 9-1
6
NV-DS60EG NV-DS60EGE
3.1.2.2. CSP IC LOCATION
Fig. 9-2
7
NV-DS60EG NV-DS60EGE
3.1.3. SPECIAL NOTE
All integrated circuits and many other semiconductor devices
are electrostatically sensitive and therefore require the special
handlings
are electrostatically sensitive and therefore require the special
handlings
techniques
described
under
the
"ELECTROSTATICALLY SENSITIVE (ES) DEVICES" section
of this service manual.
of this service manual.
3.1.4. IC6001 REPLACEMENT NOTE
(For model without SD/MMC Slot)
Two types of IC6001 (M32121FCAWG or C2DBLJ000079) are
used
used
on
a
running
change
basis,
however
IC6001
(C2DBLJ000079) is supplied only as a replacement part. When
replacing IC6001, as in the following cases, it is necessary to
replace the resistor at the same time or IC6001 may have a
short life.
replacing IC6001, as in the following cases, it is necessary to
replace the resistor at the same time or IC6001 may have a
short life.
·
When replacing IC6001 (M32121FCAWG) with IC6001
(C2DBLJ000079), be sure to move resistor (Ref No.
R6051) to the R6050 location.
(C2DBLJ000079), be sure to move resistor (Ref No.
R6051) to the R6050 location.
Fig. 10-1
Fig. 10-2
3.1.5. MODEL NO. IDENTIFICATION
MARK
Use Marks shown in the chart below to distinguish the different
models included in this Service Manual.
models included in this Service Manual.
8
NV-DS60EG NV-DS60EGE
Click on the first or last page to see other NV-DS60EG / NV-DS60EGE / NV-DS60EGM / NV-DS60B / NV-DS60EN / NV-DS60ENT / NV-DS60ENC / NV-DS60A / NV-DS65EG / NV-DS65EGE / NV-DS65EGM / NV-DS65B / NV-DS65EN / NV-DS65ENT / NV-DS65ENC / NV-DS65A (serv.man2) service manuals if exist.