Panasonic HDC-SD600P / HDC-SD600EB / HDC-SD600EC / HDC-SD600EEK / HDC-SD600EF / HDC-SD600EG / HDC-SD600EP / HDC-SD600GN Service Manual ▷ View online
37
8.3.31.
Removal of the Focus Guide Pole L
and Focus Guide Pole S
and Focus Guide Pole S
Fig.D43
38
9 Measurements and Adjustments
9.1.
Electric Adjustment
• Adjustment method is different from a conventional High definition video camera.
• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
• A USB driver for service is necessary to communication with PC.
• Connection method of the main unit and an exclusive adjustment jig as follows
• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
• A USB driver for service is necessary to communication with PC.
• Connection method of the main unit and an exclusive adjustment jig as follows
9.1.1.
Adjustment Procedure
• Connect the main unit to PC with USB.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
Figure of connection
Figure of image when adjustment
Part Number of jig
• Only a necessary jig mentions it in setup of electric adjustment.
No.
Part Name
Part Number
Remarks
1
PC
------
2
AC Adaptor
------
3
USB Cable
------
4
46mm Step Up Ring
VFK1164TAR46
5
Adjustment Software (Tatsujin)
------
39
Adjustment Items
• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
40
10 Factory Setting
10.1. How To Turn On The Factory Settings?
1. Set the mode dial “Motion Picture Recording” mode.
2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but-
2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but-
ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
completion of the “FACTORY SETTINGS”.
Click on the first or last page to see other HDC-SD600P / HDC-SD600EB / HDC-SD600EC / HDC-SD600EEK / HDC-SD600EF / HDC-SD600EG / HDC-SD600EP / HDC-SD600GN service manuals if exist.