Panasonic HDC-SD200EB / HDC-SD200EC / HDC-SD200EF / HDC-SD200EG / HDC-SD200EP / HDC-TM200EE / HDC-TM200GC / HDC-TM200GD / HDC-TM200GJ / HDC-TM200GK / HDC-TM200GN / HDC-TM200GT / HDC-TM200SG / HDC-TM200EEK Service Manual ▷ View online
21
6.1.
Built-in Memory Self Check (HDC-TM200 only)
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
top screen of the Service Mode Menu being displayed.
3. Touch the [ 3 ] of LCD, select Built-in memory self check.
Operation specifications
Indication contents
• Built-in memory self check result display
Display the Built-in memory self check result information.
Displays other than “OK” are abnormalities of Built-in memory.
Displays other than “OK” are abnormalities of Built-in memory.
Push the menu button to end the service mode, and then POWER OFF.
22
6.2.
Lock Search History Indication
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
top screen of the Service Mode Menu being displayed.
3. Touch the [ 4 ] of LCD, select Lock search history indication.
Operation specifications
Indication contents
• Lock search history indication
Display the camera system error cord for three histories saved in EEPROM.
• The error cord contents which are displayed
Lock search history indication is finished by POWER OFF.
Error code
Function
51
Focus control is abnormal
52
Zoom control is abnormal
53
OIS lens control is abnormal
71
Lens cover open/close is abnormal
72
Cooling fan is abnormal
73
High temperature is abnormal
33
Communication between camera to ARM is abnormal
23
6.3.
Power ON Self Check Result Display
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
top screen of the Service Mode Menu being displayed.
3. Touch the [ 5 ] of LCD, select Power ON self check result display.
Operation specifications
Indication contents
• Power ON self check result display
Function to diagnose correct function of the device and interface between devices result display.
Display the following commnucation test result.
- CAM-PWR : Commnucation test between IC2006 to IC301
- CAM-UNI : Commnucation test between IC3400 to IC301
- CAM-UNI : Commnucation test between IC3400 to IC301
Display other than “OK” are abnomalities of each lines.
Push the menu button to end the service mode, and then POWER OFF.
24
7 Disassembly and Assembly Instructions
7.1.
Disassembly Flow Chart
7.2.
PCB Location
Click on the first or last page to see other HDC-SD200EB / HDC-SD200EC / HDC-SD200EF / HDC-SD200EG / HDC-SD200EP / HDC-TM200EE / HDC-TM200GC / HDC-TM200GD / HDC-TM200GJ / HDC-TM200GK / HDC-TM200GN / HDC-TM200GT / HDC-TM200SG / HDC-TM200EEK service manuals if exist.